 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
|
this page was intentionally left blank. metal oxide varistors | 1 table of contents features 2 defnition of terms (according to ieee specifcations c62 33) 2 power dissipation ratings 2 general characteristics 3 part marking 3 approvals 4 part number system 6 standard dimensions and lead modifcation options 7 d series electrical characteristics (5, 7, 10, 14, 20, 25 mm) 18 high energy e series electrical characteristics (5, 7, 10, 14, 20, 25 mm) 24 vz25r series - electrical characteristics 28 vz32 kw (wire lead) series electrical characteristics 29 vz32 series electrical characteristics & dimensions 30 vz34 single series electrical characteristics & dimensions 32 vz34 dual series electrical characteristics & dimensions 34 vz40 series electrical characteristics & dimensions 36 vz53 series electrical characteristics & dimensions 38 peak pulse and derating curves 40 v-i characteristics 41 soldering profle 45 5mm / 7mm taping specifcations 48 10mm taping specifcations 50 14mm taping specifcations 54 18mm / 20mm taping specifcations 58 standard bulk packaging 60 applications 61 circuit examples 62 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 2 | metal oxide varistors features ? our metal oxide varistors have ul, csa and vde approvals vde approvals are in conjunction with iec61051-2 plus specifc types comply with accelerated aging test requirements per ansi/ ieee c62 11 the factory is iso and ts16949 certifed taped parts conform to eia standards all electrical specifcations are to industry standards with defnitions conforming to ieee specifcations solderability to mil std epoxy fammability rating of 94v0 ? rohs compliance - metal oxide varistors utilizing suffx (-n) denoting rohs compliant types for disk sizes 05, 07, 10,14, 18, 20, 25, 32, 34, 40, and 53 purchased from world products, llc comply with rohs directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment our metal oxide varistors contain a maximum concentration value of 0 1% by weight in homogeneous materials for lead, mercury, hexavalent chromium, polybrominated biphenyls (pbb) and polybrominated diphenyl ethers (pbde) and of 0 01% weight in homogeneous materials for cadmium see part number system for more details ? product consistency is maintained through extremely stringent quality and statistical control on-line automatic test equipment provides 100% inspection ? extensive selection of equivalents to essentially all metal oxide varistor types all specifcations available for proper accurate design-in purposes ? extremely low leakage current levels achieved and exceptional surge handling capability through proprietary formulations ? epoxy conformity and control providing for consistent physical dimensions and improved solderability ? varistor product design fexibility and quick design cycles in order to assist our customers with their most stringent varistor applications defnition of terms (according to ieee specifcations c62.33) average power dissipation tested using two consecutive pulses at rated peak current using a 10/1000s test waveform with a minimum pulse period of 60 seconds between pulses (iec 61000-4-5) rated rms voltage, rated dc voltage: the maximum designated values of power system voltage that may be applied continuously between the terminals of a device varistor voltage: test characteristic that is used to classify varistors by type a test current of 1ma dc is typically used to determine varistor voltage classifcation type varistor voltage clamping characteristics can be defned at various test levels rated peak single pulse transient current: maximum surge current, 8/20s waveform which a varistor is rated to withstand for a single surge rated single pulse transient energy: maximum allowable energy for a single impulse (see specifed waveforms) maximum clamping voltage: measured peak voltage across the device terminals when a current impulse of specifed amplitude and waveform is conducted through the varistor typical capacitance: typical capacitance values are measured at a test frequency of 1khz power dissipation ratings disk sie pm-watts disk sie pm-watts 5mm ( < 50 vac ) 0 01 20mm ( < 50 vac ) 0 20 5mm ( 50 vac ) 0 20 20mm ( 50 vac ) 1 00 7mm ( < 50 vac ) 0 02 25mm 1 20 7mm ( 50 vac ) 0 25 32mm 1 60 10mm ( < 50 vac ) 0 05 34mm (single) 2 10 10mm ( 50 vac ) 0 40 34mm (dual) 2 73 14mm ( < 50 vac ) 0 10 40mm 2 10 14mm ( 50 vac ) 0 60 53mm 2 50 r e g i s t e r e d c o m p a n y s o c i t e n r e g i s t r e iso 900 2 sgs m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 3 general characteristics storage temperature - 55 c to 125 c operating surface temperature 125 c operating ambient temperature - 55 c to 85 c (without derating) maximum voltage-temperature coeffcient -0.01 % / c insulation resistance 1000 megohm min. hi pot (leads to case, 1 min.) 2500 vdc (phenolic coating 500 vdc and 2000 vdc ratings) typical response time 15 nsec. epoxy rating 94 v-0 current/energy derating (>85c) - 2.5 % / c dc leakage current 200a max (at rated dc working voltage) solderability mil std 202g, method 208h failure criteria voltage change 10% from initially measured varistor voltage . when determining if varistor is within aforementioned criteria the same temperature must be observed as was used for initial varistor voltage measurements . part marking example 20e241k-vb 20 e 241 k - n b CC CC CCC CC CC CC (1) (2) (3) (4) (5) (6) (1) disk diameter 5 5mm, 7 7mm, 10 10mm, 14 14mm, 18 18mm, 20 20mm, 25 25mm, 32 32mm, 34 34mm, 40 40mm, 53 53mm (2) type d standard e high energy r (applicable only for 34mm types) (3) varistor voltage 241 24 x 10 1 240 (4) tolerance j 5%, k 10%, m 20% (5) n rohs compliant series (as of october 2007 forward, per date code) (6) b phenolic coating rated at 500 vdc. phenolic coating rated at 2000 vdc reuires no marking. date code 037 first digit represents year (0 2010) . second and third digits represent the week of the year . this new date code system was implemented from 9/15/05 . note: parts will be marked sincera. (this is the brand name.) sincera 40d511k-n j=5%, k=10% c=halogen fr ee coating rohs compliant -n (as of october 2007) phenolic coating rated at 500 vdc sincera 20e241k-nb 037 037 5mm ? 32mm (wir e lead) 32mm ? 53mm date code factory identi?er depicted with black dot(s) in this position. sincera 40d511k-n 037 ther e ar e two options for placement of date code for 32mm - 53mm. c j=5%, k=10% m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 4 | metal oxide varistors notes: (1) n/a - denotes not applicable (2) iec 61051-1:2007-04, iec 61051-2:1991-01, iec 61051-2-2: 1991-01 *ul 1449 3rd edition parts are recognized to spd application category types: vz05-vz10 both d & e types (all), vz14d (all), vz14e (180-680 values only), and vz20d (180-680 values only) C other vz14e (820-112 values only) C type 3 vz20d (820-112 values only) C type 2 vz18e, vz 20e and vz25d C type 2 vz32d - vz53d C type 1 **metal oxide varistors will not be recognized to ul1414 from december 25, 2013 approvals stated above are for series types as stated modifcation to the above series types denoted by special suffxes may vary with regards to above stated approvals please consult the part numbering system portion of the catalog for this information approvals approval & file # disk size / series 5mm d series 5mm e series 7mm d series 7mm e series 10mm d series 10mm e series 14mm d series 14mm e series type type type type type type type type pb rohs pb rohs pb rohs pb rohs pb rohs pb rohs pb rohs pb rohs ul/cul 1449 3rd edition, file#e321567* n/a (1) n/a (1) 511k, 561k, 621k, 681k not approved n/a (1) n/a (1) n/a (1) n/a (1) n/a (1) n/a (1) ul1414** (values 201k) file #e71602 csa22 1 #1 (values 201k) file #227006 csa 22 2 #1 file #241120 vde file #40012632 vde file #40012630 vde file #40028559 annex q (2) n/a (1) vde file #40028554 annex q (2) n/a (1) complies with ul accelerated aging test pu: ansi/ieee c62 11 file #e196885 complies with ul accelerated aging test per: ansi/ieee c62 11 file #e321567 n/a (1) n/a (1) n/a (1) n/a (1) n/a (1) n/a (1) n/a (1) n/a (1) m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 5 notes: (1) n/a - denotes not applicable (2) 32mm (wire lead type - suffx kw) is not recognized at this time the following types are not cul recognized: 32mm (122k & 152k), 34mm (single disk - 122k), 34mm (dual disk - 122k), 40mm (122k & 152k), 53mm (301k thru 471k) (3) iec 61051-1:2007-04, iec 61051-2:1991-01, iec 61051-2-2: 1991-01 *ul 1449 3rd edition parts are recognized to spd application category types: vz05-vz10 both d & e types (all), vz14d (all), vz14e (180-680 values only), and vz20d (180-680 values only) C other vz14e (820-112 values only) C type 3 vz20d (820-112 values only) C type 2 vz18e, vz 20e and vz25d C type 2 vz32d - vz53d C type 1 **metal oxide varistors will not be recognized to ul1414 from december 25, 2013 approvals stated above are for series types as stated modifcation to the above series types denoted by special suffxes may vary with regards to above stated approvals please consult the part numbering system portion of the catalog for this information approvals approval & file # disk size / series 18mm e series 20mm d series 20mm e series 25mm d series 25mm r series 32mm 34mm 40mm 53mm type type type type type type type type type pb rohs pb rohs pb rohs pb rohs pb rohs pb rohs pb rohs pb rohs pb rohs ul/cul 1449 3rd edition, file#e321567* n/a (1) n/a (1) n/a (1) n/a (1) n/a (1) n/a (1) (2) n/a (1) (2) n/a (1) (2) n/a (1) (2) ul1414** (values 201k) file #e71602 values 301k, 911k, 102k, 112k not approved csa 22 1 #1 (values 201k) file #227006 values 301k, 621k, 681k, 751k, 781k, 911k, 102k, 112k not approved value 181k not approved csa 22 2 #1 file #241120 vde file #40012632 vde file #40012630 values 301k, 621k, 681k, 751k, 781k, 911k, 102k, 112k not approved vde file #40028559 annex q (3) n/a (1) n/a (1) vde file #40028554 annex q (3) complies with ul acceler- ated aging test pu: ansi/ ieee c62 11 file #e196885 values 301k, 621k, 681k, 751k, 781k, 911k, 102k, 112k not approved value 181k not approved complies with ul acceler- ated aging test per: ansi/ ieee c62 11 file #e321567 n/a (1) values 820k - 241k not ap- proved n/a (1) n/a (1) values 820k & 751k - 112k only n/a (1) n/a (1) n/a (1) n/a (1) n/a (1) m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 6 | metal oxide varistors part number system example: vz20d241kbocx-vpn v z 20 e 241 k b o c x - v p n CC CC CCC CC CCCC CC CC CC CC CC CC CC CC (1) (2) (3) (4) (5) (6) (7) (8) (9) (10) (11) (12) (13) (1) series v = varistor (2) type z = zinc oxide (3) disk diameter 05 = 5mm, 07 = 7mm, 10 = 10mm, 14 = 14mm, 18 = 18mm, 20 = 20mm, 25 = 25mm, 32 = 32mm, 34 = 34mm, 40 = 40mm, 53 = 53mm (4) type d = standard e = high energy type r = (applicable only for 34mm types) (5) varistor voltage 241 = 24 x 10 1 = 240 (dc volts) (6) tolerance j = 5%, k = 10% (7) packing code b = bulk pack (for taped parts packing code, see taping specifcations ) note: for sizes 32 and larger please reference specifcation pages for felds beyond (6) (8) lead confguration (for bulk parts) s = straight o = outward crimp i = inward crimp l = inline crimp n = bulk parts for 320vac and larger come standard with inline crimp (see illustration below) for straight disk seating on pc boards if straight leads are required instead of inline crimp please use code n in the appropriate position as stated above note: also applicable for 32mm (kw series) with wire leads r = bare disk without leads (no epoxy) available in 20mm & 25mm disk sizes**(rohs compliant) (9) lead cutting a = 4 0 1 0mm ( 16 04) (crimped lead) b = 3 0 1 0mm ( 12 04) (crimped lead) c = 4 5 1 5mm ( 18 06) (crimped lead) d = 6 5 1 0mm ( 26 04) (crimped lead) e = 4 0 1 0mm ( 18 04) (straight lead) f = 5 0 1 0mm ( 2 04) (crimped lead) g = 3 3 0 5mm ( 13 02) (crimped lead) (for lead length reference points see standard lead modifcations) note: also applicable for 32mm (kw series) with wire leads (10) lead spacing x = 10mm (0 4) lead spacing 1mm (0 039) lead diameter) (for 18mm and 20mm disk diameter only ) z = 5mm (0 2) leadspacing (for 10mm and 14mm disk diameters ) (11) extremely high energy rating v = 15ka for 20mm,12ka for 18mm and 7 5ka for 14mm, e series parts only available in varistor voltages 14mm and 20mm (181-112), 18mm (181-781) (ul1414 and ul1449 3rd edition recognized parts) csa recognized for 14, 18 & 20mm e series parts all values 201 with the exception of 14e (911, 102 & 112) 14e v series parts are rated at 7 5ka (if you have a special voltage request, please inquire) *** (12) coating option p = phenolic coating with 2000vdc rating applicable for ul1414 (5mm C 20mm), ul1449 3rd edition (14mm, 18mm and 20mm v type only), and csa (5mm C 20mm) recognized parts *** b = phenolic coating with 500vdc rating applicable for ul1414 (5mm C 20mm) and csa (5mm - 20mm) recognized parts *** y = bare disk with leads (no epoxy) available in 20mm & 25mm disk size** (rohs compliant 20e suffx v 181k - 471k csa c/us certifed file #154862) c = halogen free coating applicable for ul1449 (3rd edition), ul1414, (5mm-20mm), csa (5mm-25mm) and vde (14d, 14e, 18e and 20e only) *** (13) rohs compliant* n = rohs compliant (available in disk sizes 5mm C 53mm) l 3.0mm (0.12") max seating plane * compliant with directive 2002/95/ec of the european parliament and of the council of 27 january 2003 on the restriction of the use of certain hazardous substances in electrical and electronic equipment (rohs directive) please note solderability profle on page 107 ** 32mm C 53mm types are also available as bare disk with and without leads reference suffx codes stated in electrical/dimensions section for these types in this catalog ***metal oxide varistors may not be recognized to ul1414 from december 25, 2013 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 7 disk size a max d max s w nom c l dimension e max and a mm mm in mm in mm 1 in 04 mm 02 in 001 mm in for other than standard (straight lead) lead length, please see defnitions, part number system (9) lead cutting for specs and suffx codes please see e maximum thickness and off-set (a) dimension by part number (next page) 5 10 0 0 4 + 7 0 + 0 28 5 0 0 2 0 6 0 024 1 6 0 4 0 06 0 016 7 12 0 0 47 9 5 0 37 5 0 0 2 0 6 0 024 1 6 0 4 0 06 0 016 10 17 0 0 67 12 5 0 49 7 5 0 3 0 8 0 031 1 6 0 4 0 06 0 016 14 20 5 0 8 16 5 0 65 7 5 0 3 0 8 0 031 1 6 0 4 0 06 0 016 18 24 0 0 94 20 0 0 79 7 5 0 3 0 8 0 031 2 05 0 4 0 08 0 016 18* 24 0 0 94 20 0 0 79 10 0 0 4 1 0 0 039 2 05 0 4 0 08 0 016 20 28 0 1 10 24 0 0 94 7 5 0 3 0 8 0 031 2 05 0 4 0 08 0 016 20* 28 0 1 10 24 0 0 94 10 0 0 4 1 0 0 039 2 05 0 4 0 08 0 016 25 31 75 1 25 27 9 1 10 12 7 0 5 1 0 0 039 2 05 0 4 0 08 0 016 25r 34 5 1 35 29 0 1 14 12 7 1 0 5 1 0 0 2 0 040 20 0 32kw (wire lead) 45 0 1 77 40 0 1 57 22 5 1 5 0 9 0 059 1 5 0 5 0 06 0 02 for other than standard (straight lead) lead length, please see defnitions, part number system (9) lead cutting for specs and suffx codes notes: 1 maximum epoxy extending on leads (measured from bottom most portion of disk) is 3mm for all disk sizes with exception of 20mm, 25mm and 32mm disk sizes which are 4mm 2 reduced dimensions, special lead diameters and special lead spacing may be avaliable upon request 3 bulk parts for 320vac and larger come standard with inline crimp (as referenced above) for straight disk seating on pc boards if 320vac and larger size are required without in-line crimp, please reference part number system position # (8) and add n and reference a off-set dimensions 4 the maximum straight lead length avaliable for 5mm leadspacing is 40mm max, 7 5mm leadspacing is 32mm max, 10mm leadspacing is 35mm max straight leads inward crimp outward crimp standard dimensions and lead modifcation options + dmax for phenolic p type is 8mm ( 31) * for 10mm lead spacing use suffx x for bulk parts (18mm and 20mm disk diameter) s a max w d max l seating plane c l 3 0mm (0 12") max w s seating plane c l s 3 0mm (0 12") max w l 3.0mm (0.12") max seating plane e max a inline crimp 25r series d dimensions of bare disk disk size d 20mm 20 01 0mm 25mm 25 01 0mm a max w s l a e max d max m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 8 | metal oxide varistors standard dimensions and lead modifcation options (continued) e max dimensions (for standard epoxy) dimensions are in mm (inches) 5d series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) 5d180k 3.4 (.13) 1.2 (.05) 5d221k 3.6 (.14) 1.6 (.063) 5d220k 3.6 (.14) 1.3 (.05) 5d241k 3.7 (.145) 1.8 (.07) 5d270k 3.8 (.15) 1.4 (.055) 5d271k 3.8 (.15) 2.0 (.08) 5d330k 3.9 (.15) 1.2 (.05) 5d301k 3.9 (.15) 2.3 (.09) 5d390k 4.0 (.16) 1.3 (.05) 5d331k 4.1 (.16) 2.4 (.094) 5d470k 3.8 (.15) 1.5 (.06) 5d361k 4.4 (.17) 2.5 (.1) 5d560k 3.9 (.15) 1.6 (.063) 5d391k 4.5 (.18) 2.7 (.1) 5d680k 4.2 (.165) 1.8 (.07) 5d431k 4.7 (.185) 2.9 (.11) 5d820k 3.4 (.13) 1.2 (.05) 5d471k 4.9 (.19) 3.6 (.14) 5d101k 3.6 (.14) 1.2 (.05) 5d511k 5.1 (.2) *3.1 (.12) 5d121k 3.8 (.15) 1.3 (.05) 5d561k 5.3 (.21) *3.3 (.13) 5d151k 3.9 (.15) 1.3 (.05) 5d621k 5.5 (.22) *3.9 (.15) 5d181k 3.5 (.138) 1.5 (.06) 5d681k 5.7 (.22) *4.3 (.17) 5d201k 3.6 (.14) 1.6 (.063) 7d series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) 7d180k 3.4 (.13) 1.2 (.05) 7d221k 3.6 (.14) 1.6 (.063) 7d220k 3.6 (.14) 1.3 (.05) 7d241k 3.7 (.145) 1.8 (.07) 7d270k 3.8 (.15) 1.4 (.055) 7d271k 3.8 (.15) 2.0 (.08) 7d330k 3.9 (.15) 1.2 (.05) 7d301k 3.9 (.15) 2.3 (.09) 7d390k 4.0 (.16) 1.3 (.05) 7d331k 4.1 (.16) 2.4 (.094) 7d470k 3.8 (.15) 1.5 (.06) 7d361k 4.4 (.17) 2.5 (.1) 7d560k 3.9 (.15) 1.6 (.063) 7d391k 4.5 (.18) 2.7 (.1) 7d680k 4.2 (.165) 1.8 (.07) 7d431k 4.7 (.185) 2.9 (.11) 7d820k 3.4 (.13) 1.2 (.05) 7d471k 4.9 (.19) 3.6 (.14) 7d101k 3.6 (.14) 1.2 (.05) 7d511k 5.1 (.2) *3.1 (.12) 7d121k 3.8 (.15) 1.3 (.05) 7d561k 5.3 (.21) *3.3 (.13) 7d151k 3.9 (.15) 1.3 (.05) 7d621k 5.5 (.22) *3.9 (.15) 7d181k 3.5 (.138) 1.5 (.06) 7d681k 5.7 (.22) *4.3 (.17) 7d201k 3.6 (.14) 1.6 (.063) * bulk parts for 320vac and larger come standard with inline crimp (as referenced at beginning of standard dimensions and lead modifcation options section ) for straight disk seating on pc boards . therefore, a dimension is not applicable . if 320vac and larger size are reuired without in-line crimp, please reference part number system position # (8) and add n and reference a dimensions (for off-set) above . e max a m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 9 standard dimensions and lead modifcation options (continued) e max dimensions (for standard epoxy) dimensions are in mm (inches) 10d series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) 10d180k 3.8 (.15) 1.4 (.055) 10d301k 4.4 (.17) 2.5 (.1) 10d220k 4.0 (.16) 1.5 (.06) 10d331k 4.6 (.18) 2.5 (.1) 10d270k 4.2 (.165) 1.6 (.063) 10d361k 4.9 (.19) 2.7 (.1) 10d330k 4.3 (.17) 1.8 (.07) 10d391k 5.0 (.2) 2.9 (.11) 10d390k 4.4 (.17) 1.6 (.063) 10d431k 5.2 (.2) 3.1 (.12) 10d470k 4.4 (.17) 1.7 (.067) 10d471k 5.4 (.21) 3.6 (.14) 10d560k 4.4 (.17) 1.8 (.07) 10d511k 5.5 (.22) *3.4 (.13) 10d680k 4.6 (.18) 2.1 (.083) 10d561k 5.8 (.23) *3.5 (.138) 10d820k 3.8 (.15) 1.4 (.055) 10d621k 6.1 (.24) *4.2 (.165) 10d101k 3.8 (.15) 1.4 (.055) 10d681k 6.4 (.25) *4.6 (.18) 10d121k 4.0 (.16) 1.5 (.06) 10d751k 6.7 (.26) *5.0 (.197) 10d151k 4.2 (.165) 1.5 (.06) 10d781k 6.9 (.27) *5.0 (.197) 10d181k 4.2 (.165) 1.6 (.063) 10d821k 7.1 (.28) *5.4 (.2) 10d201k 4.2 (.165) 1.8 (.07) 10d911k 7.5 (.3) *5.9 (.23) 10d221k 4.1 (.16) 1.8 (.07) 10d102k 7.6 (.3) *6.4 (.25) 10d241k 4.2 (.165) 2.0 (.08) 10d112k 7.8 (.31) *7.0 (.275) 10d271k 4.3 (.17) 2.2 (.087) 14d series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) 14d180k 3.9 (.15) 1.4 (.055) 14d301k 4.4 (.17) 2.6 (.1) 14d220k 4.1 (.16) 1.5 (.06) 14d331k 4.6 (.18) 2.6 (.1) 14d270k 4.3 (.17) 1.7 (.067) 14d361k 4.9 (.19) 2.8 (.11) 14d330k 4.5 (.18) 1.9 (.075) 14d391k 5.0 (.2) 3.0 (.12) 14d390k 4.5 (.18) 1.7 (.067) 14d431k 5.2 (.2) 3.2 (.126) 14d470k 4.3 (.17) 1.8 (.07) 14d471k 5.4 (.21) 3.8 (.15) 14d560k 4.5 (.18) 2.0 (.08) 14d511k 5.5 (.22) *3.4 (.13) 14d680k 4.7 (.185) 2.2 (.087) 14d561k 5.8 (.23) *3.5 (.138) 14d820k 3.8 (.15) 1.4 (.055) 14d621k 6.1 (.24) *4.2 (.165) 14d101k 3.8 (.15) 1.5 (.06) 14d681k 6.4 (.25) *4.7 (.185) 14d121k 4.0 (.16) 1.5 (.06) 14d751k 6.7 (.26) *5.1 (.2) 14d151k 4.2 (.165) 1.5 (.06) 14d781k 6.9 (.27) *5.1 (.2) 14d181k 4.4 (.17) 1.7 (.067) 14d821k 7.1 (.28) *5.5 (.22) 14d201k 4.6 (.18) 1.9 (.075) 14d911k 7.5 (.3) *6.0 (.24) 14d221k 4.1 (.16) 1.9 (.075) 14d102k 7.6 (.3) *6.5 (.255) 14d241k 4.2 (.165) 2.1 (.083) 14d112k 8.0 (.31) *7.2 (.28) 14d271k 4.3 (.17) 2.2 (.087) * bulk parts for 320vac and larger come standard with inline crimp (as referenced at beginning of standard dimensions and lead modifcation options section ) for straight disk seating on pc boards . therefore, a dimension is not applicable . if 320vac and larger size are reuired without in-line crimp, please reference part number system position # (8) and add n and reference a dimensions (for off-set) above . e max a m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 10 | metal oxide varistors standard dimensions and lead modifcation options (continued) e max dimensions (for standard epoxy) dimensions are in mm (inches) 20d series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) 20d180k 4.3 (.17) 1.5 (.06) 20d301k 5.0 (.2) 2.6 (.1) 20d220k 4.5 (.18) 1.6 (.063) 20d331k 5.0 (.2) 2.7 (.1) 20d270k 4.7 (.185) 1.8 (.07) 20d361k 5.4 (.21) 2.9 (.11) 20d330k 4.9 (.19) 2.1 (.083) 20d391k 5.5 (.22) 3.1 (.12) 20d390k 5.1 (.2) 2.1 (.083) 20d431k 5.7 (.22) 3.3 (.13) 20d470k 5.3 (.21) 2.2 (.087) 20d471k 5.5 (.22) 4.0 (.157) 20d560k 5.5 (.22) 2.2 (.087) 20d511k 5.7 (.22) *3.4 (.13) 20d680k 5.7 (.22) 2.4 (.094) 20d561k 5.9 (.23) *3.8 (.15) 20d820k 4.3 (.17) 1.5 (.06) 20d621k 6.2 (.24) *4.5 (.18) 20d101k 4.3 (.17) 1.6 (.063) 20d681k 6.5 (.26) *4.8 (.19) 20d121k 4.4 (.17) 1.6 (.063) 20d751k 6.8 (.27) *5.2 (.2) 20d151k 4.6 (.18) 1.6 (.063) 20d781k 7.0 (.275) *5.4 (.2) 20d181k 4.6 (.18) 1.8 (.07) 20d821k 7.2 (.28) *5.6 (.22) 20d201k 4.7 (.185) 2.0 (.08) 20d911k 7.5 (.3) *6.5 (.255) 20d221k 4.8 (.19) 2.0 (.08) 20d102k 7.9 (.31) *6.6 (.26) 20d241k 4.9 (.19) 2.2 (.087) 20d112k 8.4 (.33) *7.3 (.287) 20d271k 4.9 (.19) 2.3 (.09) 25d series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) 25d181k 4.8 (.19) 2.2 (.087) 25d511k 6.8 (.27) *3.5 (.138) 25d201k 5.0 (.2) 2.2 (.087) 25d561k 7.0 (.275) *3.9 (.15) 25d221k 5.0 (.2) 2.2 (.087) 25d621k 7.4 (.29) *4.8 (.19) 25d241k 5.3 (.21) 2.4 (.094) 25d681k 7.5 (.29) *5.0 (.197) 25d271k 5.5 (.22) 2.5 (.1) 25d751k 7.6 (.30) *5.4 (.2) 25d301k 5.6 (.22) 2.7 (.1) 25d781k 8.0 (.31) *5.5 (.22) 25d331k 5.9 (.23) 2.8 (.11) 25d821k 8.2 (.32) *5.8 (.23) 25d361k 5.9 (.23) 3.0 (.12) 25d911k 8.2 (.32) *7.0 (.275) 25d391k 6.0 (.24) 3.3 (.13) 25d102k 8.8 (.35) *7.2 (.28) 25d431k 6.5 (.256) 3.5 (.138) 25d112k 9.4 (.37) *7.4 (.29) 25d471k 6.5 (.26) 5.0 (.197) * bulk parts for 320vac and larger come standard with inline crimp (as referenced at beginning of standard dimensions and lead modifcation options section ) for straight disk seating on pc boards . therefore, a dimension is not applicable . if 320vac and larger size are reuired without in-line crimp, please reference part number system position # (8) and add n and reference a dimensions (for off-set) above . e max a m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 11 standard dimensions and lead modifcation options (continued) e max dimensions (for standard epoxy) dimensions are in mm (inches) 25r series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) 25r181kbs 5.75 (.23) 2.55 (.10) 25r511kbs 7.20 (.28) 4.00 (.158) 25r201kbs 5.92 (.23) 2.72 (.11) 25r561kbs 7.50 (.30) 4.30 (.17) 25r221kbs 6.08 (.24) 2.88 (.11) 25r621kbs 7.85 (.30) 4.65 (.20) 25r241kbs 6.25 (.25) 3.05 (.12) 25r681kbs 8.20 (.32) 5.00 (.20) 25r271kbs 5.80 (.23) 2.60 (.10) 25r751kbs 8.28 (.32) 5.08 (.20) 25r301kbs 5.98 (.23) 2.78 (.11) 25r781kbs 8.47 (.33) 5.27 (.20) 25r331kbs 6.15 (.24) 2.95 (.12) 25r821kbs 8.70 (.34) 5.50 (.21) 25r361kbs 6.35 (.25) 3.15 (.12) 25r911kbs 9.18 (.36) 5.98 (.23) 25r391kbs 6.50 (.25) 3.30 (.13) 25r102kbs 9.66 (.39) 6.46 (.25) 25r431kbs 6.75 (.27) 3.55 (.14) 25r112kbs 10.20 (.40) 7.00 (.27) 25r471kbs 7.00 (.28) 3.80 (.15) 25r122kbs 10.70 (.42) 7.50 (.30) 32d series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) 32d201kw 5.6 (.22) 2.6 (.1) 32d621kw 7.9 (.31) *4.9 (.19) 32d221kw 5.7 (.22) 2.7 (.11) 32d681kw 8.1 (.32) *5.1 (.2) 32d241kw 5.8 (.23) 2.8 (.11) 32d751kw 8.5 (.33) *5.5 (.216) 32d271kw 5.9 (.23) 2.9 (.11) 32d781kw 8.7 (.34) *5.7 (.22) 32d331kw 6.3 (.25) 3.3 (.13) 32d821kw 9.0 (.35) *6.0 (.236) 32d361kw 6.5 (.255) 3.5 (.137) 32d911kw 9.4 (.37) *6.4 (.25) 32d391kw 6.6 (.26) 3.6 (.14) 32d951kw 9.8 (.39) *6.7 (.26) 32d431kw 6.8 (.27) 3.8 (.15) 32d102kw 10.0 (.39) *7.0 (.275) 32d471kw 6.9 (.27) 3.9 (.15) 32d112kw 10.5 (.41) *7.5 (.295) 32d511kw 7.3 (.29) *4.3 (.17) 32d122kw 11.0 (.43) *8.0 (.31) 32d561kw 7.3 (.29) *4.3 (.17) 32d152kw 12.5 (.49) *9.5 (.37) * bulk parts for 320vac and larger come standard with inline crimp (as referenced at beginning of standard dimensions and lead modifcation options section ) for straight disk seating on pc boards . therefore, a dimension is not applicable . if 320vac and larger size are reuired without in-line crimp, please reference part number system position # (8) and add n and reference a dimensions (for off-set) above . e max a m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 12 | metal oxide varistors standard dimensions and lead modifcation options (continued) e max dimensions (for standard epoxy) dimensions are in mm (inches) 5e high energy series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) 5e820k 3.4 (.13) 1.2 (.05) 5e331k 4.1 (.16) 2.4 (.094) 5e181k 3.5 (.138) 1.5 (.06) 5e361k 4.4 (.17) 2.5 (.1) 5e201k 3.6 (.14) 1.6 (.063) 5e391k 4.5 (.18) 2.7 (.1) 5e221k 3.6 (.14) 1.6 (.063) 5e431k 4.7 (.185) 2.9 (.11) 5e241k 3.7 (.145) 1.8 (.07) 5e471k 4.9 (.19) 3.6 (.14) 5e271k 3.8 (.15) 2.0 (.08) 7e high energy series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) 7e820k 3.4 (.13) 1.2 (.05) 7e331k 4.1 (.16) 2.4 (.094) 7e181k 3.5 (.138) 1.5 (.06) 7e361k 4.4 (.17) 2.5 (.1) 7e201k 3.6 (.14) 1.6 (.063) 7e391k 4.5 (.18) 2.7 (.1) 7e221k 3.6 (.14) 1.6 (.063) 7e431k 4.7 (.185) 2.9 (.11) 7e241k 3.7 (.145) 1.8 (.07) 7e471k 4.9 (.19) 3.6 (.14) 7e271k 3.8 (.15) 2.0 (.08) 10e high energy series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) 10e820k 3.8 (.15) 1.4 (.055) 10e361k 4.9 (.19) 2.7 (.1) 10e181k 4.2 (.165) 1.8 (.07) 10e391k 5.0 (.2) 2.9 (.11) 10e201k 4.2 (.165) 1.8 (.07) 10e431k 5.2 (.2) 3.1 (.12) 10e221k 4.1 (.16) 1.8 (.07) 10e471k 5.4 (.21) 3.6 (.14) 10e241k 4.2 (.165) 2.0 (.08) 10e511k 5.5 (.22) *3.4 (.13) 10e271k 4.3 (.17) 2.2 (.087) 10e561k 5.8 (.23) *3.5 (.138) 10e331k 4.6 (.18) 2.5 (.1) 10e821k 7.1 (.28) *5.4 (.2) * bulk parts for 320vac and larger come standard with inline crimp (as referenced at beginning of standard dimensions and lead modifcation options section ) for straight disk seating on pc boards . therefore, a dimension is not applicable . if 320vac and larger size are reuired without in-line crimp, please reference part number system position # (8) and add n and reference a dimensions (for off-set) above . ** for suffx v (extremely high energy type) add 0 . 1 (0 . 004) to e max . e max a m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 13 standard dimensions and lead modifcation options (continued) e max dimensions (for standard epoxy) dimensions are in mm (inches) 14e high energy series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) **14e820k 3.8 (.15) 1.4 (.055) **14e361k 4.9 (.19) 2.8 (.11) **14e181k 4.4 (.17) 1.7 (.067) **14e391k 5.0 (.2) 3.0 (.12) **14e201k 4.6 (.18) 1.9 (.075) **14e431k 5.2 (.2) 3.2 (.126) **14e221k 4.5 (.18) 1.9 (.075) **14e471k 5.4 (.21) 3.8 (.15) **14e241k 4.5 (.18) 2.1 (.083) **14e511k 5.5 (.22) *3.4 (.13) **14e271k 4.5 (.18) 2.2 (.087) **14e561k 5.8 (.23) *3.5 (.138) **14e331k 4.6 (.18) 2.6 (.1) **14e821k 7.1 (.28) *5.5 (.22) 18e high energy series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) **18e820k 4.1 (.16) 1.5 (.06) **18e471k 5.8 (.23) 3.9 (.15) **18e181k 4.4 (.17) 1.9 (.075) **18e511k 6.1 (.24) *3.4 (.13) **18e201k 4.7 (.185) 1.9 (.075) **18e561k 6.2 (.24) *3.8 (.15) **18e221k 4.9 (.19) 1.9 (.075) **18e621k 6.2 (.24) *3.2 (.13) **18e241k 5.0 (.2) 2.0 (.08) **18e681k 6.3 (.25) *3.3 (.13) **18e271k 5.1 (.2) 2.2 (.08) **18e751k 6.5 (.26) *3.5 (.14) **18e301k 5.2 (.2) 2.3 (.09) **18e781k 6.8 (27) *3.7 (.15) **18e331k 5.2 (.2) 2.7 (.11) **18e821k 7.4 (.29) *5.5 (.22) **18e361k 5.4 (.21) 2.8 (.11) **18e911k 7.6 (.3) *4.1 (.16) **18e391k 5.5 (.22) 3.0 (.12) **18e102k 7.9 (.31) *4.4 (.18) **18e431k 5.7 (.22) 3.2 (.126) **18e112k 8.3 (.32) *4.8 (.19) 20e high energy series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) **20e820k 4.3 (.17) 1.5 (.06) **20e471k 5.8 (.23) 4.0 (.157) **20e181k 4.6 (.18) 1.8 (.07) **20e511k 5.9 (.23) *3.4 (.13) **20e201k 4.9 (.19) 2.0 (.08) **20e561k 5.9 (.23) *3.8 (.15) **20e221k 5.0 (.2) 2.0 (.08) **20e621k 6.6 (.26) *4.5 (.18) **20e241k 5.1 (.2) 2.2 (.087) **20e681k 6.9 (.27) *4.8 (.19) **20e271k 5.4 (.21) 2.3 (.09) **20e751k 7.2 (.28) *5.2 (.2) **20e301k 5.5 (.22) 2.6 (.1) **20e781k 7.4 (.29) *5.4 (.2) **20e331k 5.8 (.23) 2.7 (.1) **20e821k 7.2 (.28) *5.6 (.22) **20e361k 5.4 (.21) 2.9 (.11) **20e911k 8.0 (.32) *6.5 (.255) **20e391k 5.5 (.22) 3.1 (.12) **20e102k 8.4 (.33) *6.6 (.26) **20e431k 5.7 (.22) 3.3 (.13) **20e112k 8.4 (.33) *7.3 (.287) e max a m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 14 | metal oxide varistors standard dimensions and lead modifcation options (continued) e max dimensions (for phenolic coating) dimensions are in mm (inches) 5d series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) b p b p 5d180k 3.8 (.15) 5.0 (.196) 1.2 (.05) **5d221k 4.5 (.177) 5.4 (.21) 1.6 (.063) 5d220k 3.9 (.15) 5.1 (.2) 1.3 (.05) **5d241k 4.7 (.185) 5.5 (.216) 1.8 (.07) 5d270k 4.0 (.157) 5.2 (.2) 1.4 (.055) **5d271k 4.8 (.19) 5.5 (.216) 2.0 (.08) 5d330k 4.0 (.157) 5.2 (.2) 1.2 (.05) **5d301k 4.9 (.19) 5.6 (.22) 2.3 (.09) 5d390k 4.1 (.16) 5.3 (.21) 1.3 (.05) **5d331k 5.0 (.196) 5.6 (.22) 2.4 (.094) 5d470k 4.1 (.16) 5.3 (.21) 1.5 (.06) **5d361k 5.1 (.2) 5.7 (.22) 2.5 (.1) 5d560k 4.2 (.165) 5.4 (.21) 1.6 (.063) **5d391k 5.2 (.2) 5.9 (.23) 2.7 (.1) 5d680k 4.4 (.17) 5.8 (.23) 1.8 (.07) **5d431k 5.3 (.21) 6.0 (.236) 2.9 (.11) **5d820k 3.8 (.15) 5.2 (.2) 1.2 (.05) **5d471k 6.0 (.236) 7.2 (.28) 3.6 (.14) **5d101k 3.8 (.15) 5.2 (.2) 1.2 (.05) 5d511k 6.3 (.25) 7.5 (.295) *3.1 (.12) **5d121k 3.9 (.15) 5.3 (.21) 1.3 (.05) 5d561k 5.5 (.216) 6.7 (.26) *3.3 (.13) **5d151k 3.9 (.15) 5.3 (.21) 1.3 (.05) 5d621k 5.6 (.22) 6.8 (.267) *3.9 (.15) **5d181k 4.1 (.16) 5.5 (.216) 1.5 (.06) 5d681k 5.9 (.23) 7.1 (.28) *4.3 (.17) **5d201k 4.1 (.16) 5.5 (.216) 1.6 (.063) 7d series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) b p b p 7d180k 3.9 (.15) 5.1 (.2) 1.2 (.05) **7d221k 4.5 (.177) 5.4 (.21) 1.6 (.063) 7d220k 4.0 (.157) 5.2 (.2) 1.3 (.05) **7d241k 4.7 (.185) 5.5 (.216) 1.8 (.07) 7d270k 4.1 (.16) 5.3 (.21) 1.4 (.055) **7d271k 4.8 (.19) 5.5 (.216) 2.0 (.08) 7d330k 4.1 (.16) 5.3 (.21) 1.2 (.05) **7d301k 4.9 (.19) 5.6 (.22) 2.3 (.09) 7d390k 4.2 (.165) 5.4 (.21) 1.3 (.05) **7d331k 5.0 (.196) 5.7 (.22) 2.4 (.094) 7d470k 4.2 (.165) 5.4 (.21) 1.5 (.06) **7d361k 5.1 (.2) 5.7 (.22) 2.5 (.1) 7d560k 4.4 (.17) 5.6 (.22) 1.6 (.063) **7d391k 5.2 (.2) 5.9 (.23) 2.7 (.1) 7d680k 4.6 (.18) 6.0 (.236) 1.8 (.07) **7d431k 5.3 (.21) 6.1 (.24) 2.9 (.11) **7d820k 3.8 (.15) 5.2 (.2) 1.2 (.05) **7d471k 6.0 (.236) 7.2 (.28) 3.6 (.14) **7d101k 3.8 (.15) 5.2 (.2) 1.2 (.05) 7d511k 6.4 (.25) 7.6 (.3) *3.1 (.12) **7d121k 3.9 (.15) 5.3 (.21) 1.3 (.05) 7d561k 5.6 (.22) 6.8 (.267) *3.3 (.13) **7d151k 3.9 (.15) 5.3 (.21) 1.3 (.05) 7d621k 5.7 (.22) 6.9 (.27) *3.9 (.15) **7d181k 4.1 (.16) 5.5 (.216) 1.5 (.06) 7d681k 5.9 (.23) 7.1 (.28) *4.3 (.17) **7d201k 4.1 (.16) 5.5 (.216) 1.6 (.063) * bulk parts for 320vac and larger come standard with inline crimp (as referenced at beginning of standard dimensions and lead modifcation options section ) for straight disk seating on pc boards . therefore, a dimension is not applicable . if 320vac and larger size are reuired without in-line crimp, please reference part number system position # (8) and add n and reference a dimensions (for off-set) above . ** these dimensions also apply to e series (high energy) parts . for suffx v (extremely high energy type) add 0 . 1 (0 . 004) to e max . e max a m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 15 standard dimensions and lead modifcation options (continued) e max dimensions (for phenolic coating) dimensions are in mm (inches) 10d series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) b p b p 10d180k 4.3 (.17) 5.5 (.216) 1.4 (.055) **10d301k 5.2 (.2) 6.1 (.24) 2.5 (.1) 10d220k 4.5 (.177) 5.7 (.22) 1.5 (.06) **10d331k 5.3 (.21) 6.3 (.25) 2.5 (.1) 10d270k 4.7 (.185) 5.9 (.23) 1.6 (.063) **10d361k 5.4 (.21) 6.4 (.25) 2.7 (.1) 10d330k 4.8 (.19) 6.0 (.236) 1.8 (.07) **10d391k 5.5 (.216) 6.5 (.256) 2.9 (.11) 10d390k 4.9 (.19) 6.1 (.24) 1.6 (.063) **10d431k 5.6 (.22) 6.7 (.26) 3.1 (.12) 10d470k 4.8 (.19) 6.1 (.24) 1.7 (.067) **10d471k 5.6 (.22) 6.8 (.267) 3.6 (.14) 10d560k 4.9 (.19) 6.1 (.24) 1.8 (.07) **10d511k 5.9 (.23) 7.1 (.28) *3.4 (.13) 10d680k 5.1 (.2) 6.5 (.256) 2.1 (.083) **10d561k 6.0 (.236) 7.2 (.28) *3.5 (.138) **10d820k 4.4 (.17) 5.8 (.23) 1.4 (.055) **10d621k 6.3 (.25) 7.5 (.295) *4.2 (.165) **10d101k 4.3 (.17) 5.7 (.22) 1.4 (.055) **10d681k 6.6 (.26) 7.8 (.307) *4.6 (.18) **10d121k 4.4 (.17) 5.8 (.23) 1.5 (.06) **10d751k 6.8 (.267) 8.0 (.315) *5.0 (.197) **10d151k 4.5 (.177) 5.9 (.23) 1.5 (.06) **10d781k 7.1 (.28) 8.1 (.32) *5.0 (.197) **10d181k 4.7 (.185) 6.1 (.24) 1.6 (.063) **10d821k 7.4 (.29) 8.4 (.33) *5.4 (.2) **10d201k 4.7 (.185) 6.1 (.24) 1.8 (.07) 10d911k 7.8 (.307) 8.8 (.346) *5.9 (.23) **10d221k 4.8 (.19) 5.8 (.23) 1.8 (.07) 10d102k 8.2 (.32) 9.2 (.36) *6.4 (.25) **10d241k 5.0 (.196) 5.9 (.23) 2.0 (.08) 10d112k 8.5 (.335) 9.5 (.37) *7.0 (.275) **10d271k 5.1 (.2) 6.0 (.236) 2.2 (.087) 14d series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) b p b p 14d180k 4.4 (.17) 5.6 (.22) 1.4 (.055) **14d301k 5.2 (.2) 6.1 (.24) 2.6 (.1) 14d220k 4.6 (.18) 5.8 (.23) 1.5 (.06) **14d331k 5.3 (.21) 6.3 (.25) 2.6 (.1) 14d270k 4.8 (.19) 6.0 (.236) 1.7 (.067) **14d361k 5.4 (.21) 6.4 (.25) 2.8 (.11) 14d330k 5.0 (.196) 6.2 (.24) 1.9 (.075) **14d391k 5.5 (.216) 6.5 (.256) 3.0 (.12) 14d390k 4.7 (.185) 5.9 (.23) 1.7 (.067) **14d431k 5.6 (.22) 6.7 (.26) 3.2 (.126) 14d470k 4.8 (.19) 6.2 (.24) 1.8 (.07) **14d471k 5.7 (.22) 6.9 (.27) 3.8 (.15) 14d560k 5.0 (.196) 6.2 (.24) 2.0 (.08) **14d511k 5.9 (.23) 7.1 (.28) *3.4 (.13) 14d680k 5.2 (.2) 6.6 (.26) 2.2 (.087) **14d561k 6.2 (.24) 7.4 (.29) *3.5 (.138) **14d820k 4.4 (.17) 5.8 (.23) 1.4 (.055) **14d621k 6.4 (.25) 7.6 (.3) *4.2 (.165) **14d101k 4.4 (.17) 5.8 (.23) 1.5 (.06) **14d681k 6.6 (.26) 7.8 (.307) *4.7 (.185) **14d121k 4.5 (.177) 5.9 (.23) 1.5 (.06) **14d751k 6.9 (.27) 8.1 (.32) *5.1 (.2) **14d151k 4.5 (.177) 5.9 (.23) 1.5 (.06) **14d781k 7.3 (.287) 8.2 (.32) *5.1 (.2) **14d181k 4.7 (.185) 6.1 (.24) 1.7 (.067) **14d821k 7.5 (.3) 8.5 (.335) *5.5 (.22) **14d201k 4.7 (.185) 6.1 (.24) 1.9 (.075) 14d911k 7.9 (.31) 8.9 (.35) *6.0 (.24) **14d221k 4.8 (.19) 5.8 (.23) 1.9 (.075) 14d102k 8.2 (.32) 9.2 (.36) *6.5 (.255) **14d241k 5.0 (.196) 5.9 (.23) 2.1 (.083) 14d112k 8.7 (.34) 9.7 (.38) *7.2 (.28) **14d271k 5.1 (.2) 6.0 (.236) 2.2 (.087) * bulk parts for 320vac and larger come standard with inline crimp (as referenced at beginning of standard dimensions and lead modifcation options section ) for straight disk seating on pc boards . therefore, a dimension is not applicable . if 320vac and larger size are reuired without in-line crimp, please reference part number system position # (8) and add n and reference a dimensions (for off-set) above . ** these dimensions also apply to e series (high energy) parts . for suffx v (extremely high energy type) add 0 . 1 (0 . 004) to e max . e max a m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 16 | metal oxide varistors standard dimensions and lead modifcation options (continued) e max dimensions (for phenolic coating) dimensions are in mm (inches) 20d series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) b p b p 20d180k 4.8 (.19) 6.0 (.236) 1.5 (.06) **20d301k 5.7 (.22) 6.7 (.28) 2.6 (.1) 20d220k 5.1 (.2) 6.2 (.24) 1.6 (.063) **20d331k 5.8 (.23) 6.8 (.27) 2.7 (.1) 20d270k 5.2 (.2) 6.4 (.25) 1.8 (.07) **20d361k 5.9 (.23) 6.8 (.27) 2.9 (.11) 20d330k 5.4 (.21) 6.6 (.26) 2.1 (.083) **20d391k 6.0 (.236) 7.0 (.275) 3.1 (.12) 20d390k 5.2 (.2) 6.4 (.25) 2.1 (.083) **20d431k 6.0 (.236) 7.1 (.28) 3.3 (.13) 20d470k 5.4 (.21) 6.6 (.26) 2.2 (.087) **20d471k 6.1 (.24) 7.3 (.287) 4.0 (.157) 20d560k 5.6 (.22) 6.8 (.27) 2.2 (.087) **20d511k 6.3 (.25) 7.5 (.3) *3.4 (.13) 20d680k 5.9 (.23) 7.3 (.287) 2.4 (.094) **20d561k 6.6 (.26) 7.8 (.307) *3.8 (.15) **20d820k 4.8 (.19) 6.2 (.24) 1.5 (.06) **20d621k 6.8 (.27) 8.0 (.31) *4.5 (.18) **20d101k 4.8 (.19) 6.2 (.24) 1.6 (.063) **20d681k 7.0 (.275) 8.2 (.32) *4.8 (.19) **20d121k 4.9 (.19) 6.3 (.25) 1.6 (.063) **20d751k 7.3 (.287) 8.5 (.335) *5.2 (.2) **20d151k 5.0 (.196) 6.4 (.25) 1.6 (.063) **20d781k 7.6 (.3) 8.6 (.34) *5.4 (.2) **20d181k 5.1 (.2) 6.5 (.256) 1.8 (.07) **20d821k 7.8 (.31) 8.8 (.346) *5.6 (.22) **20d201k 5.2 (.2) 6.6 (.26) 2.0 (.08) **20d911k 8.2 (.32) 9.2 (.36) *6.5 (.255) **20d221k 5.4 (.21) 6.5 (.256) 2.0 (.08) **20d102k 8.6 (.34) 9.6 (.377) *6.6 (.26) **20d241k 5.7 (.22) 6.6 (.26) 2.2 (.087) **20d112k 9.1 (.36) 10.1 (.397) *7.3 (.287) **20d271k 5.8 (.23) 6.6 (.26) 2.3 (.09) * bulk parts for 320vac and larger come standard with inline crimp (as referenced at beginning of standard dimensions and lead modifcation options section ) for straight disk seating on pc boards . therefore, a dimension is not applicable . if 320vac and larger size are reuired without in-line crimp, please reference part number system position # (8) and add n and reference a dimensions (for off-set) above . ** these dimensions also apply to e series (high energy) parts . for suffx v (extremely high energy type) add 0 . 1 (0 . 004) to e max . e max a m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 17 standard dimensions and lead modifcation options (continued) e max dimensions (for phenolic coating) dimensions are in mm (inches) 18e high energy series style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) style e max mm (in) off-set dimension (a) 1 (0.04) mm (in) b p b p **18e820k 4.5 (.177) 5.9 (.23) 1.5 (.06) **18e471k 6.0 (.236) 7.2 (.28) 3.9 (.15) **18e181k 5.0 (.196) 6.4 (.25) 1.9 (.075) **18e511k 6.2 (.24) 7.4 (.29) *3.4 (.13) **18e201k 5.0 (.196) 6.4 (.25) 1.9 (.075) **18e561k 6.5 (.256) 7.7 (.3) *3.8 (.15) **18e221k 5.3 (.21) 6.4 (.25) 1.9 (.075) **18e621k 6.7 (.26) 7.9 (.31) *3.2 (.13) **18e241k 5.5 (.216) 6.4 (.25) 2.0 (.08) **18e681k 6.9 (.27) 8.1 (.32) *3.3 (.13) **18e271k 5.6 (.22) 6.4 (.25) 2.2 (.08) **18e751k 7.2 (.28) 8.4 (.33) *3.5 (1.4) **18e301k 5.7 (.22) 6.6 (.26) 2.3 (.09) **18e781k 7.5 (.3) 8.5 (.33) *3.7 (.15) **18e331k 5.7 (.22) 6.6 (.26) 2.7 (.11) **18e821k 7.7 (.3) 8.7 (.34) *5.5 (.22) **18e361k 5.7 (.22) 6.6 (.26) 2.8 (.11) **18e911k 8.1 (.32) 9.1 (.36) *4.1 (.16) **18e391k 5.8 (.23) 6.9 (.27) 3.0 (.12) **18e102k 8.5 (.33) 9.5 (.37) *4.4 (.18) **18e431k 5.9 (.23) 7.0 (.275) 3.2 (.126) **18e112k 9.0 (.35) 10 (.39) *4.8 (.19) * bulk parts for 320vac and larger come standard with inline crimp (as referenced at beginning of standard dimensions and lead modifcation options section ) for straight disk seating on pc boards . therefore, a dimension is not applicable . if 320vac and larger size are reuired without in-line crimp, please reference part number system position # (8) and add n and reference a dimensions (for off-set) above . ** for suffx v (extremely high energy type) add 0 . 1 (0 . 004) to e max . e max a m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 18 | metal oxide varistors d series electrical characteristics (5, 7, 10, 14, 20, 25 mm) part number maximum continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 2ms joules 10/1000s joules 8/20s amps min volts max volts volts amps pf vz05d180kbs 11 14 0.4 0.6 100 16.2 19.8 36 1 1500 vz07d180kbs 0.8 1.0 250 36 2.5 2900 vz10d180kbs 1.7 2.1 500 36 5 6000 vz14d180kbs 3.5 4.0 1000 36 10 15000 vz20d180kbs 10 12 2000 36 20 27000 vz05d220kbs 14 18 0.6 0.8 100 20 24 43 1 1260 vz07d220kbs 0.9 1.3 250 43 2.5 2400 vz10d220kbs 2.0 2.5 500 43 5 5000 vz14d220kbs 4.0 5.0 1000 43 10 12000 vz20d220kbs 13 15 2000 43 20 20000 vz05d270kbs 17 22 0.7 0.9 100 24 30 53 1 1050 vz07d270kbs 1.1 1.4 250 53 2.5 1800 vz10d270kbs 2.5 3.0 500 53 5 4000 vz14d270kbs 5.0 6.0 1000 53 10 8500 vz20d270kbs 15 17 2000 53 20 15000 vz05d330kbs 20 26 0.9 1.2 100 30 36 65 1 850 vz07d330kbs 1.3 1.7 250 65 2.5 1500 vz10d330kbs 3.1 4.0 500 65 5 3500 vz14d330kbs 6.0 7.5 1000 65 10 7200 vz20d330kbs 20 22 2000 65 20 12200 vz05d390kbs 25 31 1.1 1.3 100 35 43 77 1 600 vz07d390kbs 1.6 2.1 250 77 2.5 1230 vz10d390kbs 3.7 4.6 500 77 5 3100 vz14d390kbs 7.0 8.6 1000 77 10 6300 vz20d390kbs 24 26 2000 77 20 10000 vz05d470kbs 30 38 1.4 1.6 100 42 52 93 1 500 vz07d470kbs 2.0 2.5 250 93 2.5 950 vz10d470kbs 4.5 5.5 500 93 5 2800 vz14d470kbs 9.0 10 1000 93 10 5500 vz20d470kbs 30 33 2000 93 20 9350 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 19 d series electrical characteristics (5, 7, 10, 14, 20, 25 mm) (cont.) part number maximum continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 2ms joules 10/1000s joules 8/20s amps min volts max volts volts amps pf vz05d560kbs 35 45 1.5 1.9 100 50 62 110 1 400 vz07d560kbs 2.5 3.1 250 110 2.5 890 vz10d560kbs 5.5 7.0 500 110 5 2400 vz14d560kbs 10 11 1000 110 10 4800 vz20d560kbs 35 38 2000 110 20 8000 vz05d680kbs 40 56 1.8 2.3 100 61.2 74.8 135 1 360 vz07d680kbs 3.0 3.8 250 135 2.5 850 vz10d680kbs 6.5 8.2 500 135 5 2100 vz14d680kbs 13 14 1000 135 10 4000 vz20d680kbs 40 43 2000 135 20 6800 vz05d820kbs 50 66 2.4 3.0 400 74 90 135 5 350 vz07d820kbs 4.2 5.5 1200 135 10 830 vz10d820kbs 8.4 12 2500 135 25 1600 vz14d820kbs 15 22 4500 135 50 3300 vz20d820kbs 37 48 6500 135 100 5600 vz05d101kbs 60 85 2.4 3.5 400 90 110 165 5 320 vz07d101kbs 4.8 6.5 1200 165 10 730 vz10d101kbs 10 15 2500 165 25 1400 vz14d101kbs 20 30 4500 165 50 2900 vz20d101kbs 38 50 6500 165 100 4700 vz05d121kbs 75 102 3.0 5.0 400 108 132 200 5 250 vz07d121kbs 5.9 7.8 1200 200 10 570 vz10d121kbs 12 18 2500 200 25 1200 vz14d121kbs 22 34 4500 200 50 2600 vz20d121kbs 40 55 6500 200 100 4100 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 20 | metal oxide varistors d series electrical characteristics (5, 7, 10, 14, 20, 25 mm) (cont.) part number maximum continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 2ms joules 10/1000s joules 8/20s amps min volts max volts volts amps pf vz05d151kbs 95 127 3.5 5.5 400 135 165 250 5 180 vz07d151kbs 7.6 9.7 1200 250 10 400 vz10d151kbs 16 22 2500 250 25 1100 VZ14D151KBS 30 45 4500 250 50 2000 vz20d151kbs 50 70 6500 250 100 3200 vz05d181kbs 120 160 4.2 8.0 400 170 207 320 5 155 vz07d181kbs 8.8 12 1200 300 10 305 vz10d181kbs 18.5 27.5 2500 300 25 700 vz14d181kbs 33 53 4500 300 50 1400 vz20d181kbs 60 85 10000 300 100 2500 vz25d181kbs 90 180 18000 300 100 3900 vz05d201kbs 130 175 5.0 8.5 400 184 224 340 5 140 vz07d201kbs 10 13 1200 340 10 275 vz10d201kbs 20 30 2500 300 25 640 vz14d201kbs 38 60 4500 300 50 1370 vz20d201kbs 70 95 10000 300 100 2200 vz25d201kbs 200 20000 300 100 3600 vz05d221kbs 140 180 6.0 9.0 400 198 242 360 5 125 vz07d221kbs 11 14 1200 360 10 250 vz10d221kbs 23 32 2500 360 25 600 vz14d221kbs 40 60 4500 360 50 1150 vz20d221kbs 75 100 10000 360 100 2000 vz25d221kbs 225 20000 360 100 3300 vz05d241kbs 150 200 6.5 10 400 216 264 395 5 115 vz07d241kbs 11 16 1200 395 10 230 vz10d241kbs 25 35 2500 395 25 560 vz14d241kbs 45 66 4500 395 50 1060 vz20d241kbs 82 120 10000 395 100 1900 vz25d241kbs 235 20000 395 100 3000 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 21 d series electrical characteristics (5, 7, 10, 14, 20, 25 mm) (cont.) part number maximum continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 2ms joules 10/1000s joules 8/20s amps min volts max volts volts amps pf vz05d271kbs 180 230 7.5 11 400 255 311 475 5 105 vz07d271kbs 13 18 1200 455 10 205 vz10d271kbs 30 40 2500 455 25 500 vz14d271kbs 52 72 4500 455 50 950 vz20d271kbs 90 127 10000 455 100 1700 *vz25d271kbs 245 20000 465 100 2600 vz05d301kbs 195 250 8.0 11.5 400 270 330 525 5 95 vz07d301kbs 13 19 1200 505 10 185 vz10d301kbs 32 42.5 2500 505 25 450 vz14d301kbs 56 78 4500 505 50 890 vz20d301kbs 100 135 10000 505 100 1540 vz25d301kbs 255 20000 505 100 2400 vz05d331kbs 210 275 8.5 11.7 400 297 363 540 5 85 vz07d331kbs 14 20 1200 540 10 170 vz10d331kbs 33.5 44.5 2500 540 25 415 vz14d331kbs 63 87 4500 540 50 800 vz20d331kbs 110 148 10000 540 100 1400 *vz25d331kbs 270 20000 540 100 2200 vz05d361kbs 230 300 9.0 13 400 324 396 595 5 80 vz07d361kbs 17 25 1200 595 10 155 vz10d361kbs 36 47 2500 595 25 380 vz14d361kbs 70 98 4500 595 50 725 vz20d361kbs 120 163 10000 595 100 1320 vz25d361kbs 315 20000 595 100 2100 vz05d391kbs 250 330 10 15 400 351 429 650 5 75 vz07d391kbs 19 26 1200 650 10 145 vz10d391kbs 40 60 2500 650 25 350 vz14d391kbs 72 102 4500 650 50 665 vz20d391kbs 130 180 10000 650 100 1210 vz25d391kbs 342 20000 650 100 1900 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 22 | metal oxide varistors d series electrical characteristics (5, 7, 10, 14, 20, 25 mm) (cont.) part number maximum continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 2ms joules 10/1000s joules 8/20s amps min volts max volts volts amps pf vz05d431kbs 275 370 11 16 400 387 473 710 5 65 vz07d431kbs 21 28 1200 710 10 130 vz10d431kbs 45 65 2500 710 25 310 vz14d431kbs 75 115 4500 710 50 600 vz20d431kbs 140 190 10000 710 100 1120 vz25d431kbs 370 20000 710 100 1700 vz05d471kbs 300 385 13 19 400 423 517 775 5 55 vz07d471kbs 23 30 1200 775 10 115 vz10d471kbs 47 70 2500 775 25 280 vz14d471kbs 80 125 4500 775 50 570 vz20d471kbs 150 220 10000 775 100 1000 vz25d471kbs 390 20000 775 100 1600 vz05d511kbs 320 420 15 21 400 459 561 865 5 39 vz07d511kbs 23 32 1200 850 10 82 vz10d511kbs 50 71 2500 840 25 260 vz14d511kbs 84 128 4500 840 50 530 vz20d511kbs 152 222 10000 840 100 950 vz25d511kbs 422 20000 840 100 1500 vz05d561kbs 360 470 17 25 400 522 638 960 5 36 vz07d561kbs 27 39 1200 960 10 75 vz10d561kbs 48 72 2500 910 25 240 vz14d561kbs 85 139 4500 950 50 480 vz20d561kbs 154 226 10000 910 100 900 vz25d561kbs 460 20000 910 100 1300 vz05d621kbs 390 505 19 27 400 558 682 1040 5 33 vz07d621kbs 29 43 1200 1040 10 68 vz10d621kbs 49 73 2500 1025 25 150 vz14d621kbs 88 142 4500 1025 50 270 vz20d621kbs 158 228 10000 1025 100 770 vz25d621kbs 495 20000 1025 100 1200 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 23 d series electrical characteristics (5, 7, 10, 14, 20, 25 mm) (cont.) part number maximum continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 2ms joules 10/1000s joules 8/20s amps min volts max volts volts amps pf vz05d681kbs 420 560 21 30 400 612 748 1120 5 30 vz07d681kbs 32 45 1200 1120 10 62 vz10d681kbs 50 74 2500 1120 25 130 vz14d681kbs 90 142 4500 1120 50 240 vz20d681kbs 160 230 10000 1120 100 700 vz25d681kbs 515 20000 1120 100 1100 vz10d751kbs 460 615 51 75 2500 675 825 1240 25 120 vz14d751kbs 100 143 4500 1240 50 210 vz20d751kbs 175 255 10000 1240 100 640 vz25d751kbs 530 20000 1240 100 1000 vz10d781kbs 485 640 52 80 2500 702 858 1290 25 120 vz14d781kbs 105 148 4500 1240 50 205 vz20d781kbs 180 265 10000 1240 100 590 vz25d781kbs 540 20000 1240 100 990 vz10d821kbs 510 675 55 85 2500 738 902 1350 25 110 vz14d821kbs 110 157 4500 1350 50 200 vz20d821kbs 195 282 10000 1350 100 510 vz25d821kbs 550 20000 1350 100 920 vz10d911kbs 550 745 60 93 2500 819 1001 1400 25 90 vz14d911kbs 120 175 4500 1400 50 175 vz20d911kbs 215 310 10000 1400 100 430 vz25d911kbs 600 20000 1400 100 860 vz10d102kbs 625 825 68 102 2500 900 1100 1650 25 80 vz14d102kbs 130 190 4500 1620 50 145 vz20d102kbs 230 342 10000 1620 100 380 vz25d102kbs 630 20000 1620 100 760 vz10d112kbs 680 895 72 115 2500 957.6 1170.4 1815 25 70 vz14d112kbs 140 215 4500 1800 50 140 vz20d112kbs 250 383 10000 1800 100 340 vz25d112kbs 700 20000 1800 100 690 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 24 | metal oxide varistors high energy e series electrical characteristics (5, 7, 10, 14, 18, 20 mm) part number maximum continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 10/1000s joules 8/20s amps min volts max volts volts amps pf vz05e820kbs 50 66 3.5 800 74 90 135 5 355 vz07e820kbs 7 1750 10 790 vz10e820kbs 14 3500 25 1780 vz14e820kbs 28 6000 50 3310 vz18e820kbs 46 8000 80 4300 vz20e820kbs 56 10000 100 5300 vz05e181kbs 120 160 8 800 170 207 310 5 130 vz07e181kbs 16 1750 320 10 210 vz10e181kbs 33 3500 320 25 460 vz14e181kbs 56 6000 320 50 800 vz18e181kbs 70 9000 320 80 1300 vz20e181kbs 135 12000 320 100 1800 vz05e201kbs 130 175 8.5 800 185 225 340 5 120 vz07e201kbs 17.5 1750 330 10 200 vz10e201kbs 42 3500 330 25 430 vz14e201kbs 78 6000 330 50 770 vz18e201kbs 140 9000 340 80 1270 vz18e201kbs-v 160 12000 340 80 2000 vz20e201kbs 170 12000 340 100 1700 vz20e201kbs-v 195 15000 340 100 2200 vz05e221kbs 140 180 9 800 198 242 360 5 110 vz07e221kbs 19 1750 10 190 vz10e221kbs 43 3500 25 410 vz14e221kbs 85 6000 50 740 vz18e221kbs 150 9000 80 1220 vz18e221kbs-v 180 12000 80 1700 vz20e221kbs 180 12000 100 1600 vz20e221kbs-v 220 15000 100 2100 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 25 high energy e series electrical characteristics (5, 7, 10, 14, 18, 20 mm) (cont.) part number maximum continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 10/1000s joules 8/20s amps min volts max volts volts amps pf vz05e241kbs 150 200 10.5 800 216 264 395 5 100 vz07e241kbs 21 1750 10 170 vz10e241kbs 45 3500 25 380 vz14e241kbs 90 6000 50 700 vz18e241kbs 155 9000 80 1200 vz18e241kbs-v 195 12000 80 1500 vz20e241kbs 190 12000 100 1500 vz20e241kbs-v 240 15000 100 2000 vz05e271kbs 180 230 11 800 255 311 475 5 90 vz07e271kbs 24 1750 450 10 150 vz10e271kbs 49 3500 450 25 350 vz14e271kbs 99 6000 450 50 640 vz18e271kbs 163 9000 455 80 1050 vz20e271kbs 200 12000 455 100 1300 vz18e301kbs 195 250 170 9000 270 330 505 80 1010 vz20e301kbs 210 12000 505 100 1200 vz05e331kbs 210 275 13 800 297 363 540 5 75 vz07e331kbs 28 1750 540 10 130 vz10e331kbs 58 3500 540 25 300 vz14e331kbs 115 6000 545 50 580 vz18e331kbs 190 9000 545 80 950 vz20e331kbs 228 12000 545 100 1100 vz05e361kbs 230 300 16 800 324 396 595 5 69 vz07e361kbs 32 1750 10 123 vz10e361kbs 65 3500 25 285 vz14e361kbs 140 6000 50 540 vz18e361kbs 220 9000 80 870 vz20e361kbs 275 12000 100 1050 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 26 | metal oxide varistors high energy e series electrical characteristics (5, 7, 10, 14, 18, 20 mm) (cont.) part number maximum continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 10/1000s joules 8/20s amps min volts max volts volts amps pf vz05e391kbs 250 330 17 800 351 429 675 5 63 vz07e391kbs 35 1750 650 10 116 vz10e391kbs 70 3500 650 25 270 vz14e391kbs 150 6000 650 50 500 vz18e391kbs 245 9000 650 80 800 vz20e391kbs 305 12000 650 100 1000 vz05e431kbs 275 370 20 800 387 473 740 5 57 vz07e431kbs 40 1750 710 10 108 vz10e431kbs 80 3500 710 25 255 vz14e431kbs 165 6000 710 50 460 vz18e431kbs 270 9000 710 80 730 vz20e431kbs 330 12000 710 100 950 vz05e471kbs 300 385 21 800 423 517 775 5 50 vz07e471kbs 42 1750 10 100 vz10e471kbs 85 3500 25 230 vz14e471kbs 175 6000 50 400 vz18e471kbs 290 9000 80 660 vz20e471kbs 350 12000 100 900 vz10e511kbs 320 420 92 3500 459 561 840 25 210 vz14e511kbs 190 6000 50 350 vz18e511kbs 314 9000 80 570 vz18e511kbs-v 350 12000 80 570 vz20e511kbs 382 12000 100 800 vz20e511kbs-v 400 15000 100 800 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 27 high energy e series electrical characteristics (5, 7, 10, 14, 18, 20 mm) (cont.) part number maximum continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 10/1000s joules 8/20s amps min volts max volts volts amps pf vz10e561kbs 360 470 97 3500 522 638 910 25 170 vz14e561kbs 210 6000 50 320 vz18e561kbs 330 9000 80 560 vz20e561kbs 420 12000 100 720 vz18e621kbs 390 505 330 9000 558 682 1025 80 470 vz20e621kbs 430 12000 100 710 vz18e681kbs 420 560 340 9000 612 748 1120 80 430 vz20e681kbs 435 12000 100 680 vz18e751kbs 460 615 360 9000 675 825 1240 80 390 vz20e751kbs 440 12000 100 620 vz18e781kbs 485 640 365 9000 702 858 1290 80 370 vz20e781kbs 450 12000 1240 100 560 vz10e821kbs 510 675 110 3500 738 902 1350 25 110 vz14e821kbs 235 6000 50 190 vz18e821kbs 388 9000 80 310 vz20e821kbs 460 12000 100 530 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 28 | metal oxide varistors vz25r series electrical characteristics part number continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 10/1000s joules 8/20s kamps min volts max volts volts amps pf vz25r181kbs 120 160 225 22 170 207 300 100 4900 vz25r201kbs 130 175 250 22 184 226 340 100 4500 vz25r221kbs 140 180 281 22 200 240 360 100 4150 vz25r241kbs 150 200 294 22 220 268 395 100 3810 vz25r271kbs 180 225 306 22 243 297 475 100 3250 vz25r301kbs 195 250 319 22 270 330 505 100 3000 vz25r331kbs 210 275 338 22 297 363 540 100 2750 vz25r361kbs 230 300 394 22 324 396 595 100 2560 vz25r391kbs 250 330 428 22 351 429 650 100 2380 vz25r431kbs 275 370 463 22 387 473 710 100 2130 vz25r471kbs 300 385 488 22 423 517 775 100 2000 vz25r511kbs 320 420 528 22 459 561 865 100 1750 vz25r561kbs 360 470 575 22 522 638 960 100 1500 vz25r621kbs 385 500 619 22 558 682 1040 100 1480 vz25r681kbs 420 560 644 22 617 754 1120 100 1380 vz25r751kbs 460 615 663 22 675 825 1240 100 1250 vz25r781kbs 485 640 675 22 702 858 1290 100 1230 vz25r821kbs 510 675 688 22 735 902 1350 100 1150 vz25r911kbs 550 745 750 22 819 1001 1400 100 1100 vz25r102kbs 625 825 788 22 900 1100 1620 100 950 vz25r112kbs 680 895 875 22 962 1175 1815 100 820 vz25r122kbs 750 970 925 22 1080 1320 1980 100 730 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 29 vz32kw (wire lead) series electrical characteristics part number continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 10/1000s joules 8/20s kamps min volts max volts volts amps pf vz32d201kw 130 175 210 25 184 224 340 200 4700 vz32d221kw 140 180 235 25 198 242 360 200 4300 vz32d241kw 150 200 240 25 216 264 395 200 4000 vz32d271kw 180 230 255 25 255 311 455 200 3500 vz32d331kw 210 275 300 25 297 363 550 200 3000 vz32d361kw 230 300 325 25 324 396 595 200 2800 vz32d391kw 250 330 350 25 351 429 650 200 2500 vz32d431kw 275 370 380 25 387 473 710 200 2200 vz32d471kw 300 385 400 25 423 517 775 200 2000 vz32d511kw 320 420 430 25 459 561 840 200 1900 vz32d561kw 360 470 480 25 522 638 910 200 1700 vz32d621kw 390 505 500 25 558 682 1025 200 1600 vz32d681kw 420 560 525 25 612 748 1120 200 1500 vz32d751kw 460 615 540 25 675 825 1240 200 1400 vz32d781kw 485 640 550 25 702 858 1290 200 1300 vz32d821kw 510 675 580 25 738 902 1355 200 1200 vz32d911kw 550 745 620 25 819 1001 1500 200 1150 vz32d951kw 575 765 650 25 855 1045 1570 200 1100 vz32d102kw 625 825 680 25 900 1100 1650 200 1000 vz32d112kw 680 895 760 25 957.6 1170.4 1815 200 900 vz32d122kw 750 970 790 25 1062 1300 1980 200 800 vz32d152kw 880 1150 850 25 1350 1650 2640 200 680 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 30 | metal oxide varistors vz32 series electrical characteristics part number continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 10/1000s joules 8/20s kamps min volts max volts volts amps pf vz32d201 130 175 210 30 185 225 340 200 4700 vz32d221 140 180 240 30 198 242 360 200 4300 vz32d241 150 200 250 30 216 264 395 200 4000 vz32d271 180 230 260 30 255 311 455 200 3500 vz32d331 210 275 310 30 297 363 550 200 3000 vz32d361 230 300 330 30 324 396 595 200 2800 vz32d391 250 330 360 30 351 429 650 200 2500 vz32d431 275 370 400 30 387 473 710 200 2200 vz32d471 300 385 405 30 423 517 775 200 2000 vz32d511 320 420 440 30 459 561 840 200 1900 vz32d561 360 470 500 30 522 638 910 200 1700 vz32d621 390 505 550 30 558 682 1025 200 1600 vz32d681 420 560 600 30 612 748 1120 200 1500 vz32d751 460 615 600 30 675 825 1240 200 1400 vz32d781 485 640 600 30 702 858 1290 200 1300 vz32d821 510 675 600 30 738 902 1355 200 1200 vz32d911 550 745 630 30 819 1001 1500 200 1150 vz32d951 575 765 660 30 855 1045 1570 200 1100 vz32d102 625 825 690 30 900 1100 1650 200 1000 vz32d112 680 895 770 30 957.6 1170.4 1815 200 900 vz32d122 750 970 810 30 1062 1300 1980 200 800 vz32d152 880 1150 860 30 1350 1650 2640 200 680 part number suffx code (ie: vz32d201kr) k - straight lead kl - straight lead - left side lead orientation kq - 90 bend lead kr - uncoated disk - without leads kf - uncoated disk - with leads kn - uncoated disk - with one lead only, right side orientation knl - uncoated disk - with one lead only, left side orientation m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 31 part number d max. h max. t max. s .7mm (.03) d w vz32d201 40 (1 57) 40 (1 57) 7 5 ( 30) 2 5 ( 09) 5 71 0 ( 22 04) 1 090 50 ( 04 02) vz32d221 7 5 ( 30) 2 5 ( 09) 5 51 0 ( 22 04) 1 190 50 ( 047 02) vz32d241 7 5 ( 30) 2 8 ( 11) 5 41 0 ( 21 04) 1 320 50 ( 05 02) vz32d271 8 5 ( 33) 2 8 ( 11) 5 21 0 ( 20 04) 1 440 50 ( 056 02) vz32d331 9 0 ( 35) 3 1 ( 12) 4 81 0 ( 19 04) 1 780 50 ( 07 02) vz32d361 9 0 ( 35) 3 3 ( 13) 4 61 0 ( 18 04) 1 970 50 ( 077 02) vz32d391 9 0 ( 35) 3 6 ( 14) 4 41 0 ( 17 04) 2 110 50 ( 083 02) vz32d431 9 0 ( 35) 3 6 ( 14) 4 21 0 ( 165 04) 2 340 50 ( 09 02) vz32d471 9 7 ( 38) 3 8 ( 15) 4 21 0 ( 165 04) 2 530 50 ( 1 02) vz32d511 9 7 ( 38) 3 8 ( 15) 4 01 0 ( 16 04) 2 770 50 ( 11 02) vz32d561 9 7 ( 38) 4 0 ( 16) 4 01 0 ( 16 04) 3 080 5 ( 12 02) vz32d621 9 7 ( 38) 4 3 ( 17) 3 91 0 ( 15 04) 3 400 50 ( 134 02) vz32d681 9 7 ( 38) 4 6 ( 18) 3 61 0 ( 14 04) 3 640 50 ( 143 02) vz32d751 10 5 ( 41) 4 8 ( 19) 3 31 0 ( 13 04) 4 110 50 ( 16 02) vz32d781 10 5 ( 41) 4 8 ( 19) 3 11 0 ( 12 04) 4 150 50 ( 16 02) vz32d821 10 5 ( 41) 5 1 ( 20) 2 91 0 ( 11 04) 4 470 50 ( 176 02) vz32d911 11 5 ( 45) 5 6 ( 22) 2 51 0 ( 10 04) 4 950 50 ( 195 02) vz32d951 11 5 ( 45) 5 6 ( 22) 2 31 0 ( 09 04) 5 050 50 ( 2 02) vz32d102 12 ( 47) 5 8 ( 22) 2 11 0 ( 08 04) 5 480 50 ( 215 02) vz32d112 12 ( 47) 6 4 ( 25) 2 11 0 ( 08 04) 5 960 50 ( 23 02) vz32d122 13 ( 51) 8 4 ( 33) 1 51 0 ( 06 04) 7 20 50 ( 28 02) vz32d152 13 ( 51) 10 5 ( 41) 0 51 0 ( 02 04) 7 20 50 ( 28 02) d h t d s d h t 0 51mm 05mm (0 02" 002") 0 51mm 05mm (0 02" 002") 3 4mm 0 1mm (0 13" 004") 7 04mm 0 2mm (0 28" 008") 7 04mm 0 2mm (0 28" 008") *12 7mm t yp (0 5") 3 7mm 0 25mm (0 146" 01") 25 4mm 0 5mm (1" 0 02") 25 4mm 0 5mm (1" 0 02") 18 0mm 0 5mm (0 71" 0 02") 8 0mm 0 5mm (0 315" 0 02") 5mm max (0 2") 5mm max (0 2") 5 08 mm t yp (0 2") straight leads part number suffx k 90 bend leads part number suffx kq vz32 series dimensions uncoated disk part number suffx kr ag electrode w 32.60mm 0.50 (1.28" 0.02) ag electrode zinc oxide disk note: all drawings with leads are right side oriented. m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 32 | metal oxide varistors vz34 single series electrical characteristics part number continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 10/1000s joules 8/20s kamps 1 time min volts max volts volts amps pf vz34r201 130 175 310 40 185 225 340 300 10000 vz34r221 140 180 330 40 198 242 360 300 9000 vz34r241 150 200 360 40 216 264 395 300 8000 vz34r271 180 230 390 40 255 311 455 300 7100 vz34r301 195 250 405 40 270 330 505 300 6000 vz34r331 210 275 430 40 297 363 540 300 4800 vz34r361 230 300 460 40 324 396 595 300 5600 vz34r391 250 330 490 40 351 429 650 300 5000 vz34r431 275 370 550 40 387 473 710 300 4500 vz34r471 300 385 600 40 423 517 775 300 4000 vz34r511 320 420 640 40 459 561 840 300 3800 vz34r561 360 470 710 40 522 638 910 300 3700 vz34r621 390 505 800 40 558 682 1025 300 3300 vz34r681 420 560 910 40 612 748 1120 300 3000 vz34r751 460 615 920 40 675 825 1240 300 2600 vz34r781 485 640 930 40 702 858 1290 300 2700 vz34r821 510 675 940 40 738 902 1355 300 2500 vz34r911 550 745 960 40 819 1001 1500 300 1800 vz34r951 575 765 1000 40 855 1045 1570 300 1700 vz34r102 625 825 1055 40 900 1100 1650 300 1600 vz34r112 680 895 1155 40 957.6 1170.4 1815 300 1500 vz34r122 750 970 1250 40 1062 1300 1980 300 1300 - part number suffx code (ie: vz34r201k) k - straight lead ka - tab leads outward crimp kl - straight lead - left side lead orientation kq - 90 bend lead kr - uncoated disk - without leads kf - uncoated disk - with leads kn - uncoated disk - with one lead only, right side orientation knl - uncoated disk - with one lead only, left side orientation m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 33 vz34 single series dimensions straight leads part number suffx k 90 bend leads part number suffx kq d h t d s 0.51mm .05mm (0.02 .002 ) 0.51mm .05mm (0.02 .002 ) 3.40mm 0.1mm (0.13 0.004) 7.04mm 0.2mm (0.28 .008) 7.04mm 0.2mm (0.28 .008) 12.7mm t yp. (0.5) 3.55mm 0.25mm (0.14.01 ) 25.4mm 0.5mm (1.0 0.02) 5mm max (0.2) d h t 3.40mm 0.1mm (0.13 0.004) 25.4mm 0.5mm (1.0 0.02) 5mm max (0.2) 8.0mm 0.5mm (0.315 0.02) 5.08mm t yp. (0.2) part number d max. h max. t max. s .7mm (.03) d w vz34r201 42 (1.65) 42 (1.65) 7.5 (.30) 2.5 (.10) 5.71.0 (.22.04) 1.340.50 (.05.02) vz34r221 7.5 (.30) 2.5 (.10) 5.51.0 (.22.04) 1.470.50 (.057.02) vz34r241 7.5 (.30) 2.8 (.11) 5.41.0 (.21.04) 1.620.50 (.0602) vz34r271 8.5 (.33) 2.8 (.11) 5.21.0 (.20.04) 1.770.50 (.07.02) vz34r301 9.0 (.35) 3.0 (.12) 5.01.0 (.20.04) 2.000.50 (.078.02) vz34r331 9.0 (.35) 3.1 (.12) 4.81.0 (.19 .04) 2.190.50 (.086.02) vz34r361 9.0 (.35) 3.3 (.13) 4.61.0 (.18.04) 2.420.50 (.095.02) vz34r391 9.0 (.35) 3.6 (.14) 4.41.0 (.17.04) 2.590.50 (.1.02) vz34r431 9.0 (.35) 3.6 (.14) 4.21.0 (.17.04) 2.880.50 (.11.02) vz34r471 9.7 (.38) 3.8 (.15) 4.21.0 (.17.04) 3.1 0.50 (.12.02) vz34r511 9.7 (.38) 3.8 (.15) 4.01.0 (.16.04) 3.410.50 (.134.02) vz34r561 9.7 (.38) 4.0 (.16) 4.01.0 (.16.04) 4.190.50 (.165.02) vz34r621 9.7 (.38) 4.3 (.17) 3.91.0 (.15.04) 4.190.50 (.165.02) vz34r681 9.7 (.38) 4.6 (.18) 3.61.0 (.14.04) 4.490.50 (.177.02) vz34r751 10.5 (.41) 4.8 (.19) 3.31.0 (.13.04) 4.950.50 (.195.02) vz34r781 10.5 (.41) 4.8 (.19) 3.11.0 (.12.04) 5.120.50 (.2.02) vz34r821 10.5 (.41) 5.1 (.20) 2.91.0 (.11.04) 5.500.50 (.22.02) vz34r911 11.5 (.45) 5.6 (.22) 2.51.0 (.10.04) 6.090.50 (.24.02) vz34r951 11.5 (.45) 5.6 (.22) 2.31.0 (.09.04) 6.380.50 (.25.02) vz34r102 12.0 (.47) 5.8 (.23) 2.11.0 (.08.04) 6.750.50 (.265.02) vz34r112 12.0 (.47) 6.4 (.25) 2.11.0 (.08.04) 7.340.50 (.29.02) vz34r122 12.5 (.49) 6.8 (.27) 1.91.0 (.07.04) 7.50.50 (.30.02) t 37.26mm max (1.47") 37.26mm max (1.47") 12.0mm max (0.47") 1.0mm (0.04") 5.6mm 1 (0.22" 0.04) 4.0mm max (0.16") 7.06mm 0.2 (0.28" 0.008) 0.51mm 0.05 (0.02" 0.002) 25.43mm 0.51 (1" 0.02) tab leads outward crimp part number suffx ka uncoated disk part number suffx kr ag electrode w ag electrode zinc oxide disk 33.66mm 0.50 (1.33" 0.02) note: all drawings with leads are right side oriented. m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 34 | metal oxide varistors vz34 dual series electrical characteristics part number continuous rated voltage* rated single pulse transient varistor voltage @1ma dc* maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c** energy*** peak*** ac rms volts dc volts 10/1000s joules 8/20s kamps 1 time min volts max volts volts* amps pf vz34r201 130 175 310 40 185 225 340 300 7900 vz34r221 140 180 330 40 198 242 360 300 7200 vz34r241 150 200 360 40 216 264 395 300 6600 vz34r271 180 230 390 40 255 311 455 300 5600 vz34r301 195 250 405 40 270 330 505 300 5200 vz34r331 210 275 430 40 297 363 540 300 4800 vz34r361 230 300 460 40 324 396 595 300 4400 vz34r391 250 330 490 40 351 429 650 300 4100 vz34r431 275 370 550 40 387 473 710 300 3800 vz34r471 300 385 600 40 423 517 775 300 3400 vz34r511 320 420 640 40 459 561 840 300 3200 vz34r561 360 470 710 40 522 638 910 300 2700 vz34r621 390 505 800 40 558 682 1025 300 2600 vz34r681 420 560 910 40 612 748 1120 300 2400 vz34r751 460 615 920 40 675 825 1240 300 2200 vz34r781 485 640 930 40 702 858 1290 300 2100 vz34r821 510 675 940 40 738 902 1355 300 2000 vz34r911 550 745 960 40 819 1001 1500 300 1800 vz34r951 575 765 1000 40 855 1045 1570 300 1700 vz34r102 625 825 1055 40 900 1100 1650 300 1600 vz34r112 680 895 1155 40 957.6 1170.4 1815 300 1500 vz34r122 750 970 1250 40 1062 1300 1980 300 1300 - part number suffx code (ie: vz34r201kd) kd - straight lead kdq - 90 bend lead * for leads 1-3, double published rating ** for leads 1-3, 50% of published rating *** if leads 1-3 are shorted together, then the energy between 2 and (13) will be double the rating . termination lead 1 lead 1 lead 2 lead 3 lead 2 lead 3 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 35 vz34 dual series dimensions straight leads part number suffx kd 90 bend leads part number suffx kdq d h t s s 0.5mm (0.02) 3.4mm 0.1mm (0.13 0.004) 7.04mm 0.2mm (0.28 .008) 7.04mm 0.2mm (0.28 .008) 12.7mm t yp. (0.5) 3.55mm 0.25mm (0.14 .01) 25.4mm 0.5mm (1.0 0.02) 7mm max (0.275) d h t 0.5mm (0.02) 3.4mm 0.1mm (0.13 0.004) 12.7mm t yp. (0.5) 5.08mm t yp. (0.2) 25.4mm 0.5mm (1.0 0.02) 7mm max (0.275) part number d max. h max. t max. s .7mm (.03) vz34r201 42 (1.65) 42 (1.65) 9.1 (.36) 4.1 (.16) vz34r221 9.2 (.36) 4.2 (.17) vz34r241 9.3 (.37) 4.6 (.18) vz34r271 9.5 (.37) 4.8 (.19) vz34r301 10.5 (.41) 5.2 (.20) vz34r331 11.3 (.44) 5.4 (.21) vz34r361 11.5 (.45) 5.8 (.23) vz34r391 11.6 (.46) 6.2 (.24) vz34r431 11.9 (.47) 6.5 (.26) vz34r471 12.8 (.50) 6.9 (.27) vz34r511 13.1 (.52) 7.2 (.28) vz34r561 13.4 (.53) 7.7 (.30) vz34r621 13.6 (.54) 8.2 (.32) vz34r681 13.9 (.55) 8.8 (.35) vz34r751 15.3 (.60) 9.3 (.37) vz34r781 15.5 (.61) 9.6 (.38) vz34r821 15.5 (.61) 10.1 (.40) vz34r911 17.0 (.67) 11.1 (.44) vz34r951 17.2 (.68) 11.3 (.44) vz34r102 18.0 (.71) 11.8 (.46) vz34r112 18.6 (.73) 13.0 (.51) note: all drawings with leads are right side oriented. m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 36 | metal oxide varistors vz40 series electrical characteristics part number continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 10/1000s joules 8/20s kamps min volts max volts volts amps pf vz40d201 130 175 310 40 185 225 340 300 10000 vz40d221 140 180 330 40 198 242 360 300 9000 vz40d241 150 200 360 40 216 264 395 300 8000 vz40d271 180 230 390 40 255 311 455 300 7100 vz40d301 195 250 405 40 270 330 505 300 6550 vz40d331 210 275 460 40 297 363 550 300 6000 vz40d361 230 300 475 40 324 396 595 300 5600 vz40d391 250 330 490 40 351 429 650 300 5000 vz40d431 275 370 550 40 387 473 710 300 4500 vz40d471 300 385 600 40 423 517 775 300 4000 vz40d511 320 420 640 40 459 561 840 300 3800 vz40d561 360 470 710 40 522 638 910 300 3700 vz40d621 390 505 800 40 558 682 1025 300 3300 vz40d681 420 560 910 40 612 748 1120 300 3000 vz40d751 460 615 910 40 675 825 1240 300 2600 vz40d781 485 640 910 40 702 858 1290 300 2500 vz40d821 510 675 910 40 738 902 1355 300 2300 vz40d911 550 745 960 40 819 1001 1500 300 2200 vz40d951 575 765 1000 40 855 1045 1570 300 2000 vz40d102 625 825 1055 40 900 1100 1650 300 1900 vz40d112 680 895 1155 40 957.6 1170.4 1815 300 1800 vz40d122 750 970 1250 40 1062 1300 1980 300 1700 vz40d152 900 1200 1400 40 1350 1650 2475 300 1500 part number suffx code (ie: vz40d201kr) k - straight lead kl - straight lead - left side lead orientation kq - 90 bend lead kr - uncoated disk - without leads kf - uncoated disk - with leads kn - uncoated disk - with one lead only, right side orientation knl - uncoated disk - with one lead only, left side orientation m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 37 d h t d s d h t 0 51m m 05mm (0 02" 002") 0 51mm 05mm (0 02" 002") 3 4mm 0 1mm (0 13" 004") 7 04mm 0 2mm (0 28" 008") 7 04mm 0 2mm (0 28" 008") *10 1mm t yp (0 40") 3 7mm 0 25 (0 146" 01") 25 4mm 0 5mm (1" 0 02") 25 4mm 0 5mm (1" 0 02") 18 0mm 0 5mm (0 71" 0 02") 8 0mm 0 5mm (0 315" 0 02") 5mm max (0 2") 5mm max (0 2") 5 08mm t yp (0 02") vz40 series dimensions straight leads part number suffx k 0 bend leads part number suffx k part number d max. h max. t max. s .7mm (.03) d w vz40d201 48 (1 89) 48 (1 89) 7 5 ( 30) 2 5 ( 09) 5 71 0 ( 22 04) 1 130 50 ( 044 02) vz40d221 7 5 ( 30) 2 5 ( 09) 5 51 0 ( 22 04) 1 240 50 ( 049 02) vz40d241 7 5 ( 30) 2 8 ( 11) 5 41 0 ( 21 04) 1 380 50 ( 054 02) vz40d271 8 5 ( 33) 2 8 ( 11) 5 21 0 ( 20 04) 1 500 50 ( 06 02) vz40d301 8 7 ( 34) 3 0 ( 12) 5 01 0 ( 20 04) 1 680 50 ( 07 02) vz40d331 9 0 ( 35) 3 1 ( 12) 4 81 0 ( 19 04) 1 860 50 ( 073 02) vz40d361 9 0 ( 35) 3 3 ( 13) 4 61 0 ( 18 04) 2 060 50 ( 08 02) vz40d391 9 0 ( 35) 3 6 ( 14) 4 41 0 ( 17 04) 2 20 50 ( 087 02) vz40d431 9 0 ( 35) 3 6 ( 14) 4 21 0 ( 165 04) 2 440 50 ( 096 02) vz40d471 9 7 ( 38) 3 8 ( 15) 4 21 0 ( 165 04) 2 640 50 ( 104 02) vz40d511 9 7 ( 38) 3 8 ( 15) 4 01 0 ( 16 04) 2 890 50 ( 113 02) vz40d561 9 7 ( 38) 4 1 ( 16) 4 01 0 ( 16 04) 3 210 50 ( 13 02) vz40d621 9 7 ( 38) 4 3 ( 17) 3 91 0 ( 15 04) 3 550 50 ( 14 02) vz40d681 9 7 ( 38) 4 6 ( 18) 3 61 0 ( 14 04) 3 810 50 ( 15 02) vz40d751 10 5 ( 41) 4 8 ( 19) 3 31 0 ( 13 04) 4 190 50 ( 165 02) vz40d781 10 5 ( 41) 4 8 ( 19) 3 11 0 ( 12 04) 4 340 50 ( 17 02) vz40d821 10 5 ( 41) 5 1 ( 20) 2 91 0 ( 11 04) 4 670 50 ( 184 02) vz40d911 11 5 ( 45) 5 6 ( 22) 2 51 0 ( 10 04) 5 10 50 ( 2 02) vz40d951 11 5 ( 45) 5 6 ( 22) 2 31 0 ( 09 04) 5 280 50 ( 21 02) vz40d102 12 0 ( 47) 5 8 ( 22) 2 11 0 ( 08 04) 5 720 50 ( 225 02) vz40d112 12 0 ( 47) 6 4 ( 25) 2 11 0 ( 08 04) 6 220 50 ( 24 02) vz40d122 13 0 ( 51) 8 4 ( 33) 1 91 0 ( 07 04) 7 50 50 ( 30 02) vz40d152 14 5 ( 57) 10 2 ( 40) 1 01 0 ( 039 04) 9 20 50 ( 36 02) ag electrode w 40.84mm 0.50 (1.61" 0.02) ag electrode zinc oxide disk uncoated disk part number suf x ?kr? note: all drawings with leads are right side oriented. m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 38 | metal oxide varistors vz53 series electrical characteristics part number continuous rated voltage rated single pulse transient varistor voltage @1ma dc maximum clamping voltage @test current 8/20s typical capacitance @1khz 25c energy peak ac rms volts dc volts 10/1000s joules 8/20s kamps min volts max volts volts amps pf vz53d201 130 175 490 70 185 225 340 500 18000 vz53d221 140 180 530 70 198 242 360 500 16000 vz53d241 150 200 570 70 216 264 395 500 14000 vz53d271 180 230 630 70 255 311 455 500 12500 vz53d301 195 250 655 70 270 330 505 500 12000 vz53d331 210 275 680 70 297 363 550 500 11500 vz53d361 230 300 730 70 324 396 595 500 10000 vz53d391 250 330 880 70 351 429 650 500 8800 vz53d431 275 370 950 70 387 473 710 500 8000 vz53d471 300 385 1000 70 423 517 775 500 7200 vz53d511 320 420 1100 70 459 561 840 500 6600 vz53d561 360 430 1200 70 522 638 910 500 6400 vz53d621 390 505 1300 70 558 682 1025 500 6200 vz53d681 420 560 1500 70 612 748 1120 500 5300 vz53d751 460 615 1600 70 675 825 1240 500 5000 vz53d781 485 640 1650 70 702 858 1290 500 4800 vz53d821 510 675 1800 70 738 902 1355 500 4400 vz53d911 550 745 2000 70 819 1001 1500 500 4100 vz53d951 575 765 2100 70 855 1045 1570 500 4000 vz53d102 625 825 2200 70 900 1100 1650 500 3700 vz53d112 680 895 2500 70 957.6 1170.4 1815 500 3300 vz53d122 750 970 2700 70 1062 1300 1980 500 3400 - part number suffx code (ie: vz53d201kr) k - straight lead kl - straight lead - left side lead orientation kq - 90 bend lead kr - uncoated disk - without leads kf - uncoated disk - with leads kn - uncoated disk - with one lead only, right side orientation knl - uncoated disk - with one lead only, left side orientation m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 39 vz53 series dimensions straight leads part number suffx k 90 bend leads part number suffx kq d h t d s d h t 0.7mm 0.05m m (0.028 .002) 0.7mm 0.05mm (0.028 .002) 3.8mm 0.1mm (0.15 .004) 9.5mm 0.3mm (0.37 .012) 9.5mm 0.3mm (0.37 .012) *10.1mm t yp. (0.40) 3.55mm 0.25mm (0.14.001) 25.4mm 0.5mm (1 0.02) 25.4mm 0.5mm (1 0.02) 16.0mm 0.5mm (0.62 0.02) 8.0mm 0.5mm (0.315 0.02) 7mm max (0.275) 7mm max (0.275) 2.54mm t yp. (0.1) partnumber d max. h max. t max. s .7mm (.03) d w vz53d201 61 (2.4) 61 (2.4) 7.5 (.30) 2.5 (.10) 5.71.0 (.22.04) 1.410.50 (.056.02) vz53d221 7.5 (.30) 2.5 (.10) 5.51.0 (.22.04) 1.550.50 (.061.02) vz53d241 7.5 (.30) 2.8 (.10) 5.41.0 (.21.04) 1.720.50 (.068.02) vz53d271 8.5 (.33) 2.8 (.10) 5.21.0 (.20.04) 1.870.50 (.074.02) vz53d301 8.7 (.34) 3.0 (.12) 5.01.0 (.20.04) 2.100.50 (.08.02) vz53d331 9.0 (.35) 3.1 (.12) 4.81.0 (.19.04) 2.320.50 (.091.02) vz53d361 9.0 (.35) 3.3 (.13) 4.61.0 (.18.04) 2.560.50 (.1.02) vz53d391 9.0 (.35) 3.6 (.14) 4.41.0 (.17.04) 2.740.50 (.108.02) vz53d431 9.0 (.35) 3.6 (.14) 4.21.0 (.165.04) 3.050.50 (.12.02) vz53d471 9.7 (.38) 3.8 (.15) 4.21.0 (.165.04) 3.290.50 (.13.02) vz53d511 9.7 (.38) 3.8 (.15) 4.01.0 (.16.04) 3.600.50 (.14.02) vz53d561 9.7 (.38) 4.3 (.17) 4.01.0 (.16.04) 4.430.50 (.174.02) vz53d621 9.7 (.38) 4.3 (.17) 3.91.0 (.15.04) 4.430.50 (.174.02) vz53d681 9.7 (.38) 4.6 (.18) 3.61.0 (.14.04) 4.740.50 (.187.02) vz53d751 10.5 (.41) 4.6 (.18) 3.31.0 (.13.04) 5.230.50 (.206.02) vz53d781 10.5 (.41) 4.8 (.19) 3.11.0 (.12.04) 5.410.50 (.21.02) vz53d821 10.5 (.41) 5.1 (.20) 2.91.0 (.11.04) 5.820.50 (.23.02) vz53d911 11.5 (.45) 5.6 (.22) 2.51.0 (.10.04) 6.440.50 (.25.02) vz53d951 11.5 (.45) 5.6 (.22) 2.31.0 (.09.04) 6.740.50 (.265.02) vz53d102 11.5 (.45) 5.8 (.23) 2.11.0 (.08.04) 7.130.50 (.28.02) vz53d112 11.5 (.45) 6.4 (.25) 2.11.0 (.08.04) 7.760.50 (.306.02) vz53d122 12.6 (.50) 7.0 (.28) 1.51.0 (.06.04) 8.490.50 (.334.02) uncoated disk part number suffx kr ag electrode w 53.87mm 0.50 (2.12" 0.02) ag electrode zinc oxide disk note: all drawings with leads are right side oriented. m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 40 | metal oxide varistors peak pulse and derating curves peak current per pulse versus pulse duration 1 repetition - (top line on graph) 2 repetitions 10 repetitions 10 2 repetitions 10 3 repetitions 10 4 repetitions 10 5 repetitions 10 6 repetitions - (bottom line on graph) temperature derating curve power and energy rating vs. temperature 100% 20 100 1000 10000 10% 1% percentage of peak c urrent rating pulse duration (s) 0.1% 0.01% 120% 100% 80% 60% 40% 20% 0% -55 50 60 70 80 90 100 110 120 130 ~ ~ ambient temperature c percent of rated power energy m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 41 v-i characteristics 5mm disk size vz05d561k - (top line on graph) vz05d471k vz05d431k vz05d391k vz05d361k vz05d271k vz05d241k vz05d221k vz05d201k vz05d151k vz05d121k vz05d101k vz05d820k - (bottom line on graph) (also applies to e series parts) 10 100 1000 peak v oltage (v) 10000 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 3 10 4 10 5 max. leakage current max. clamping v oltage va ristor current (a) pulse: 8x20s direct current 7mm disk size vz07d681k - (top line on graph) vz07d621k vz07d561k vz07d511k vz07d471k vz07d391k vz07d331k vz07d271k vz07d241k vz07d201k vz07d181k vz07d151k vz07d121k vz07d101k vz07d820k - (bottom line on graph) (also applies to e series parts) at idle power, current levels shown to the left of the diskontinuity illustrate typically the high end leakage current . however, if lower leakage current levels are desired, they may be guaranteed . in the clamping voltage region to the right of the diskontinuity, maximum clamping voltage is plotted . 10 100 1000 peak v oltage (v) 10000 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 3 10 4 10 5 max. leakage current max. clamping v oltage va ristor current (a) pulse: 8x20s direct current m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 42 | metal oxide varistors v-i characteristics (continued) 10mm disk size vz10d112k - (top line on graph) vz10d102k vz10d911k vz10d751k vz10d681k vz10d621k vz10d471k vz10d391k vz10d271k vz10d241k vz10d221k vz10d201k vz10d151k vz10d121k vz10d101k vz10d820k - (bottom line on graph) (also applies to e series parts) 14mm disk size vz14d112k - (top line on graph) vz14d911k vz14d821k vz14d681k vz14d621k vz14d471k vz14d431k vz14d391k vz14d361k vz14d271k vz14d241k vz14d201k vz14d151k vz14d121k vz14d101k vz14d820k - (bottom line on graph) (also applies to e series parts) at idle power, current levels shown to the left of the diskontinuity illustrate typically the high end leakage current . however, if lower leakage current levels are desired, they may be guaranteed . in the clamping voltage region to the right of the diskontinuity, maximum clamping voltage is plotted . 10 100 1000 peak v oltage (v) 10000 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 3 10 4 10 5 max. leakage current max. clamping v oltage va ristor current (a) pulse: 8x20s direct current 10 100 1000 peak v oltage (v) 10000 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 3 10 4 10 5 max. leakage current max. clamping v oltage va ristor current (a) pulse: 8x20s direct current m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 43 v-i characteristics (continued) 18mm disk size vz18e951k - (top line on graph) vz18e911k vz18e821k vz18e751k vz18e681k vz18e621k vz18e511k vz18e471k vz18e431k vz18e391k vz18e361k vz18e271k vz18e241k vz18e201k - (bottom line on graph) 10 100 1000 peak v oltage (v) 10000 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 3 10 4 10 5 max. leakage current max. clamping v oltage va ristor current (a) pulse: 8x20s direct current 20mm disk size vz20d112k - (top line on graph) vz20d911k vz20d821k vz20d681k vz20d471k vz20d431k vz20d391k vz20d271k vz20d241k vz20d221k vz20d201k vz20d151k vz20d121k vz20d101k vz20d820k - (bottom line on graph) (also applies to e series parts) at idle power, current levels shown to the left of the diskontinuity illustrate typically the high end leakage current . however, if lower leakage current levels are desired, they may be guaranteed . in the clamping voltage region to the right of the diskontinuity, maximum clamping voltage is plotted . 10 100 1000 peak v oltage (v) 10000 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 3 10 4 10 5 va ristor current (a) pulse: 8x20s direct current max. leakage current max. clamping v oltage m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 44 | metal oxide varistors v-i characteristics (continued) 25mm disk size vz25d951k - (top line on graph) vz25d911k vz25d821k vz25d751k vz25d681k vz25d621k vz25d511k vz25d471k vz25d431k vz25d391k vz25d361k vz25d271k vz25d241k vz25d201k - (bottom line on graph) 32mm disk size vz32d951k - (top line on graph) vz32d911k vz32d821k vz32d751k vz32d681k vz32d621k vz32d511k vz32d471k vz32d431k vz32d391k vz32d361k vz32d271k vz32d241k vz32d201k - (bottom line on graph) at idle power, current levels shown to the left of the diskontinuity illustrate typically the high end leakage current . however, if lower leakage current levels are desired, they may be guaranteed . in the clamping voltage region to the right of the diskontinuity, maximum clamping voltage is plotted . 10 100 1000 peak v oltage (v) 10000 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 3 10 4 10 5 max. leakage current max. clamping v oltage va ristor current (a) pulse: 8x20s direct current 10 100 1000 peak v oltage (v) 10000 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 3 10 4 10 5 max. leakage current max. clamping v oltage va ristor current (a) pulse: 8x20s direct current m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 45 40mm disk size vz40d951k - (top line on graph) vz40d911k vz40d821k vz40d751k vz40d681k vz40d621k vz40d511k vz40d471k vz40d431k vz40d391k vz40d361k vz40d271k vz40d241k vz40d201k - (bottom line on graph) at idle power, current levels shown to the left of the diskontinuity illustrate typically the high end leakage current however, if lower leakage current levels are desired, they may be guaranteed in the clamping voltage region to the right of the diskontinuity, maximum clamping voltage is plotted v-i characteristics (continued) 34mm disk size vz34d951k - (top line on graph) vz34d911k vz34d821k vz34d751k vz34d681k vz34d621k vz34d511k vz34d471k vz34d431k vz34d391k vz34d361k vz34d271k vz34d241k vz32d201k - (bottom line on graph) 10 100 1000 peak v oltage (v) 10000 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 3 10 4 10 5 max. leakage current max. clamping v oltage va ristor current (a) pulse: 8x20s direct current 10 100 1000 peak v oltage (v) 10000 max. leakage current 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 3 10 4 10 5 max. clamping v oltage va ristor current (a) pulse: 8x20s direct current m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 46 | metal oxide varistors v-i characteristics (continued) 53mm disk size vz53d951k - (top line on graph) vz53d911k vz53d821k vz53d751k vz53d681k vz53d621k vz53d511k vz53d471k vz53d431k vz53d391k vz53d361k vz53d271k vz53d241k vz53d201k - (bottom line on graph) at idle power, current levels shown to the left of the diskontinuity illustrate typically the high end leakage current . however, if lower leakage current levels are desired, they may be guaranteed . in the clamping voltage region to the right of the diskontinuity, maximum clamping voltage is plotted . 10 100 1000 peak v oltage (v) 10000 10 -6 10 -5 10 -4 10 -3 10 -2 10 -1 10 0 10 1 10 2 10 3 10 4 10 5 max. leakage current max. clamping v oltage va ristor current (a) pulse: 8x20s direct current soldering profle standard product 300 250 245c 215c 130c 160c 200 t emperatur e (deg. c) time (seconds) 150 100 50 60 0 120 180 t ypically 40 sec. 240 rohs compliant product 1. rt to 160: 100-150 second 2. 150 to 200: around 60 seconds 3. 200 to 270: around 60 seconds 4. peak temperature and time: 2705: 3 0.5sec 5. 270 to rt: at least 120 seconds 300 250 200 te mperature (deg. c) time (seconds) 150 100 50 0 400 350 300 250 200 150 100 50 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 this page was intentionally left blank. 48 | metal oxide varistors 5mm / 7mm taping specifcations item symbol 5mm disk size 7mm disk size t11, t1 t17, t3, t1d, t14, t1w, t32 t11, t1 t17, t3, t1d, t14, t1w, t32 body diameter d 7 max 7 max 9.5 max 9.5 max lead wire diameter d 0.6 0.02 0.6 0.02 0.6 0.02 0.6 0.02 pitch of component p 12.7 1 12.7 1 12.7 1 12.7 1 feed hole pitch p0 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 feed hole center to lead p1 3.85 0.7 3.85 0.7 3.85 0.7 3.85 0.7 lead to lead distance (center to center) f 5 0.8 5 0.8 5 0.8 5 0.8 component alignment h 2.0 max 2.0 max 2.0 max 2.0 max basepaper tape width w 18 1/-0.5 18 1/-0.5 18 1/-0.5 18 1/-0.5 adhesive tape width w0 10 min 10 min 10 min 10 min hole position w1 9 0.5 9 0.5 9 0.5 9 0.5 adhesive tape border w2 3 max 3 max 3 max 3 max component height h1 30 max 30 max 32 max 32 max lead-wire clinch height h0 16 0.5 16 0.5 lead-wire protrusion lx 1.0 max 1.0 max 1.0 max 1.0 max feed hole diameter d0 4 0.2 4 0.2 4 0.2 4 0.2 total tape thickness t 0.7 max 0.7 max 0.7 max 0.7 max length of clipped lead l 11 max 11 max 11 max 11 max component height from seating plane a 13 max 15 max hole center to component center p2 6.35 .7 6.35 .7 6.35 .7 6.35 .7 all dimensions are in millimeters . note: basepaper thickness 0 . 375mm 0 . 1mm (ammo box), 0 . 53mm 0 . 1mm (reel) adhesive tape thickness 0 . 16mm 0 . 03mm largest voltage which can be taped is 420vac . for 320vac and larger, only t1w or t32 is available m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 49 5mm / 7mm taping specifcations (continued) p0 d0 lx w w1 h0 d a p p2 p1 w2 w0 l h1 f d 1 5 mm max t h h p0 d0 lx w w1 h0 d a p p2 p1 w2 w0 l h1 f d 1 5 mm max t h h p0 d0 lx w w1 h0 d a p p2 p1 w2 w0 l h1 f d 1 5 mm max t h h p0 d0 lx w d p p2 p1 w2 w0 l h1 18 2 w1 f d 1 5 mm max t h h inward crimp t1d (ammo box) and t14 (reel) in-line crimp t1w (ammo box) and t32 (reel) straight lead t11 (ammo box) and t1 (reel) outward crimp t17 (ammo box) and t3 (reel) based on eia-468-b specifcations ammo box reel 5mm and 7mm disk size, (t11, t17, t1d, t1w) a = 50 max, b = 300 max, c = 340 max 2,000 pieces (5?) < 250vac = 1,500 pieces (7?) 250vac = 1,000 pieces (7?) all dimensions are in millimeters 5mm and 7mm disk size, (t1, t3, t14, t32) w = approximately 50, d = 350?max, a = approximately 30?, b = approximately 95? 2,000 pieces (5?) < 250vac = 1,500 pieces (7?) 250vac = 1,000 pieces (7?) b c a w a b d m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 50 | metal oxide varistors 10mm taping specifcations item symbol straight leads outward crimp inline crimp inward crimp t36, t19 t7, t18 t1u, t1n t10, t26 t43, t4 t15, t38 t8, t16 t6, t12 body diameter d 12.5 max 12.5 max 12.5 max 12.5 max 12.5 max 12.5 max 12.5 max 12.5 max lead wire diameter d 0.8 0.06 0.8 0.06 0.8 0.06 0.8 0.06 0.8 0.06 0.8 0.06 0.8 0.06 0.8 0.06 pitch of component p 25.4 1 25.4 1 25.4 1 25.4 1 25.4 1 25.4 1 25.4 1 25.4 1 feed hole pitch p0 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 feed hole center to lead p1 3.85 0.7 3.85 0.7 3.85 0.7 3.85 0.7 lead to lead distance (center to center) f 7.5 0.8 5.0 0.8 7.5 0.8 5.0 0.8 7.5 0.8 5.0 0.8 7.5 0.8 5.0 0.8 component alignment h 2.0 max 2.0 max 2.0 max 2.0 max 2.0 max 2.0 max 2.0 max 2.0 max basepaper tape width w 18 1/- 0.5 18 1/-0.5 18 1/- 0.5 18 1/-0.5 18 1/-0.5 18 1/-0.5 18 1/-0.5 18 1/- 0.5 adhesive tape width w0 10 min 10 min 10 min 10 min 10 min 10 min 10 min 10 min hole position w1 9 0.5 9 0.5 9 0.5 9 0.5 9 0.5 9 0.5 9 0.5 9 0.5 adhesive tape border w2 3 max 3 max 3 max 3 max 3 max 3 max 3 max 3 max component height h1 33 max 33 max 38.5 max 38.5 max 35.5 max 38.5 max 38.5 max 38.5 max lead-wire protrusion lx 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max feed hole diameter d0 4 0.2 4 0.2 4 0.2 4 0.2 4 0.2 4 0.2 4 0.2 4 0.2 total tape thickness t 0.7 max 0.7 max 0.7 max 0.7 max 0.7 max 0.7 max 0.7 max 0.7 max length of clipped lead l 11 max 11 max 11 max 11 max 11 max 11 max 11 max 11 max component height from seating plane a 19.5 max 19.5 max 19.5 max 19.5 max 19.5 max 19.5 max hole center to component center p2 6.35 0.7 6.35 0.7 6.35 0.7 6.35 0.7 all dimensions are in millimeters . note: basepaper thickness 0 . 375mm 0 . 1mm (ammo box), 0 . 53mm 0 . 1mm (reel) adhesive tape thickness 0 . 16mm 0 . 03mm largest voltage which can be taped is 460vac . for 320vac and larger, only t15, t43, t38 or t4 is available m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 51 b c a w a b d 10mm taping specifcations (continued) ammo box ammo box taping codes (t7, t36, t15, t43, t1u, t10, t8, t6) a = 65 max b = 250 max c = 340 max < 300vac = 500 to 1,000 pieces 300vac = 300 pieces all dimensions are in millimeters reel reel taping codes (t19, t18, t4, t38, t26, t1n, t16, t12) w = approximately 50 d = 350?max a = approximately 30? b = approximately 95? < 300vac = 500 to 1,000 pieces 300vac = 300 pieces m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 52 | metal oxide varistors based on eia-468-b specifcations p0 d0 lx w w1 18 2 d p 12 7 0 3 f w2 w0 l h1 d 1 7 mm max t h h straight lead t36 (ammo box) and t19 (reel) (7.5mm lead spacing) straight lead t7 (ammo box) and t18 (reel) (5mm lead spacing) p0 p1 d0 lx w w1 18 2 d p2 p f w2 w0 l h1 d 1 7 mm max t h h p0 d0 lx w w1 18 2 d p 12 7 0 3 f w2 w0 l h1 a d 1 7 mm max t h h in-line crimp t43 (ammo box) and t4 (reel) (7.5mm lead spacing) in-line crimp t15 (ammo box) and t38 (reel) (5mm lead spacing) p0 p1 d0 lx w w1 d p2 p f w2 w0 l h1 d 18 2 a 1 7 mm max t h h 10mm taping specifcations (continued) m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 53 10mm taping specifcations (continued) based on eia-468-b specifcations outward crimp t1u (ammo box) and t1n (reel) (7 5mm lead spacing) p0 d0 lx w w1 16 1 d a p 12 7 0 3 w2 f w0 l h1 d 1 7 mm max t h h outward crimp t10 (ammo box) and t26 (reel) (5mm lead spacing) inward crimp t6 (ammo box) and t12 (reel) (5mm lead spacing) p0 p1 d0 lx w w1 16 1 d p2 p f w2 w0 l h1 a d 1 7 mm max t h h p0 p1 d0 lx w w1 16 1 d p2 p f w2 w0 l h1 a d 1 7 mm max t h h p d 12 7 0 3 p 0 d 0 16 1 1 7 mm max t h h inward crimp t8 (ammo box) and t16 (reel) (7 5mm lead spacing) m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 54 | metal oxide varistors 14mm taping specifcations item symbol straight leads outward crimp inline crimp inward crimp t36, t19 t7, t18 t1u, t1n t10, t26 t43, t4 t15, t38 t8, t16 t6, t12 body diameter d 16.5 max 16.5 max 16.5 max 16.5 max 16.5 max 16.5 max 16.5 max 16.5 max lead wire diameter d 0.8 0.06 0.8 0.06 0.8 0.06 0.8 0.06 0.8 0.06 0.8 0.06 0.8 0.06 0.8 0.06 pitch of component p 25.4 1 25.4 1 25.4 1 25.4 1 25.4 1 25.4 1 25.4 1 25.4 1 feed hole pitch p0 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 feed hole center to lead p1 3.85 0.7 3.85 0.7 3.85 0.7 3.85 0.7 lead to lead distance (center to center) f 7.5 0.8 5.0 0.8 7.5 0.8 5.0 0.8 7.5 0.8 5.0 0.8 7.5 0.8 5.0 0.8 component alignment h 2.0 max 2.0 max 2.0 max 2.0 max 2.0 max 2.0 max 2.0 max 2.0 max basepaper tape width w 18 1/-0.5 18 1/-0.5 18 1/-0.5 18 1/-0.5 18 1/-0.5 18 1/-0.5 18 1/-0.5 18 1/-0.5 adhesive tape width w0 10 min 10 min 10 min 10 min 10 min 10 min 10 min 10 min hole position w1 9 0.5 9 0.5 9 0.5 9 0.5 9 0.5 9 0.5 9 0.5 9 0.5 adhesive tape border w2 3 max 3 max 3 max 3 max 3 max 3 max 3 max 3 max component height h1 37 max 37 max 40 max 40 max 40 max 40 max 40 max 40 max lead-wire protrusion lx 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max feed hole diameter d0 4 0.2 4 0.2 4 0.2 4 0.2 4 0.2 4 0.2 4 0.2 4 0.2 total tape thickness t 0.7 max 0.7 max 0.7 max 0.7 max 0.7 max 0.7 max 0.7 max 0.7 max length of clipped lead l 11 max 11 max 11 max 11 max 11 max 11 max 11 max 11 max component height from seating plane a 22.5 max 22.5 max 22.5 max 22.5 max 22.5 max 22.5 max hole center to component center p2 6.35 0.7 6.35 0.7 6.35 0.7 6.35 0.7 all dimensions are in millimeters . note: basepaper thickness 0 . 375mm 0 . 1mm (ammo box), 0 . 53mm 0 . 1mm (reel) adhesive tape thickness 0 . 16mm 0 . 03mm largest voltage which can be taped is 460vac . for 320vac and larger, only t15, t43, t38 or t4 is available m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 55 ammo box ammo box taping codes (t7, t36, t15, t43, t1u, t10, t8, t6) a = 65 max b = 250 max c = 340 max < 300vac = 500 to 1,000 pieces 300vac = 300 pieces all dimensions are in millimeters. reel reel taping codes (t19, t18, t4, t38, t26, t1n, t16, t12) w = approximately 50 d = 350?max a = approximately 30? b = approximately 95? < 300vac = 500 to 1,000 pieces 300vac = 300 pieces 14mm taping specifcations (continued) b c a w a b d m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 56 | metal oxide varistors based on eia-468-b specifcations p0 d0 lx w w1 18 2 d p 12 7 0 3 f w2 w0 l h1 d 1 7 mm max t h h straight lead t36 (ammo box) and t19 (reel) (7.5mm lead spacing) straight lead t7 (ammo box) and t18 (reel) (5mm lead spacing) p0 p1 d0 lx w w1 18 2 d p2 p f w2 w0 l h1 d 1 7 mm max t h h 14mm taping specifcations (continued) p0 d0 lx w w1 18 2 d p 12 7 0 3 f w2 w0 l h1 a d 1 7 mm max t h h in-line crimp t43 (ammo box) and t4 (reel) (7.5mm lead spacing) in-line crimp t15 (ammo box) and t38 (reel) (5mm lead spacing) p0 p1 d0 lx w w1 d p2 p f w2 w0 l h1 d 18 2 a 1 7 mm max t h h m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 57 outward crimp t1u (ammo box) and t1n (reel) (7.5mm lead spacing) inward crimp t8 (ammo box) and t16 (reel) (7.5mm lead spacing) p0 d0 lx w w1 16 1 d a p 12 7 0 3 w2 f w0 l h1 d 1 7 mm max t h h outward crimp t10 (ammo box) and t26 (reel) (5mm lead spacing) inward crimp t6 (ammo box) and t12 (reel) (5mm lead spacing) p0 p1 d0 lx w w1 16 1 d p2 p f w2 w0 l h1 a d 1 7 mm max t h h p0 p1 d0 lx w w1 16 1 d p2 p f w2 w0 l h1 a d 1 7 mm max t h h p d 12 7 0 3 p 0 d 0 16 1 1 7 mm max t h h 14mm taping specifcations (continued) m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 58 | metal oxide varistors 18mm / 20mm taping specifcations item symbol straight leads outward crimp inline crimp inward crimp t44, t1h t5, t30 t1x, t45 t50, t2x t2, t25 t60, t3x t40, t4x t35, t2d body diameter d *24 max *24 max *24 max *24 max *24 max *24 max *24 max *24 max lead wire diameter d 0.8 0.06 1.0 0.1 0.8 0.06 1.0 0.1 0.8 0.06 1.0 0.1 0.8 0.06 1.0 0.1 pitch of component p 25.4 1 25.4 1 25.4 1 25.4 1 25.4 1 25.4 1 25.4 1 25.4 1 feed hole pitch p0 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 12.7 0.3 lead to lead distance (center to center) f 7.5 0.8 10 1 7.5 0.8 10 1 7.5 0.8 10 1 7.5 0.8 10 1 component alignment h 2.0 max 2.0 max 2.0 max 2.0 max 2.0 max 2.0 max 2.0 max 2.0 max basepaper tape width w 181/-0.5 181/-0.5 181/-0.5 181/-0.5 181/-0.5 181/-0.5 181/-0.5 181/-0.5 adhesive tape width w0 10 min 10 min 10 min 10 min 10 min 10 min 10 min 10 min hole position w1 9 0.5 9 0.5 9 0.5 9 0.5 9 0.5 9 0.5 9 0.5 9 0.5 adhesive tape border w2 3 max 3 max 3 max 3 max 3 max 3 max 3 max 3 max component height h1 *48 max *48 max *48 max *48 max *48 max *48 max *48 max *48 max lead-wire clinch height h0 18 2 18 2 16 1 16 1 16 1 16 1 16 1 16 1 lead-wire protrusion lx 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max 1.0 max feed hole diameter d0 4 0.2 4 0.2 4 0.2 4 0.2 4 0.2 4 0.2 4 0.2 4 0.2 total tape thickness t 0.7 max 0.7 max 0.7 max 0.7 max 0.7 max 0.7 max 0.7 max 0.7 max length of clipped lead l 11 max 11 max 11 max 11 max 11 max 11 max 11 max 11 max component height from seating plane a *29 max *29 max *31 max *31 max *29 max *29 max all dimensions are in millimeters . note: basepaper thickness 0 . 375mm 0 . 1mm (ammo box), 0 . 53mm 0 . 1mm (reel) . adhesive tape thickness 0 . 16mm 0 . 03mm . * - 18mm disk size dimensions: d 22 max, h1 46 max, a 26 max . largest voltage which can be taped is 460vac . for 320vac and larger, only t2, t25, t60 or t3x is available m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 59 18mm / 20mm taping specifcations (continued) ammo box ammo box taping codes (t44, t5, t2, t60, t45, t50, t40, t35) a 65 max, b 250 max c 340 max 300vac 500 pieces, 300vac 300 pieces all dimensions are in millimeters. reel reel taping codes (t1h, t30, t25, t3x, t1x, t2x, t4x, t2d) a approx . 30, b approx. 95 w approx . 50, d 350max 300vac 500 pieces, 300vac 300 pieces b c a w a b d p 0 d0 lx w w 1 h 0 d a p 12.7 0.3 w 2 w 0 l h 1 f d 1.7 mm max t h h p 1 p d 12.7 0.3 p 0 h 0 d 0 1.7 mm max t h h p 1 p d 12.7 0.3 p 0 d 0 h 0 1.7 mm max t h h p 1 p 0 d 0 lx w w 1 p 1 d p 12.7 0.3 f w 2 w 0 l h1 d 1.7 mm max t h h h 0 outward crimp t45 (ammo box) and t1x (reel) (7.5mm lead spacing) t50 (ammo box) and t2x (reel) (10mm lead spacing) straight lead t44 (ammo box) and t1h (reel) (7.5mm lead spacing) t5 (ammo box) and t30 (reel) (10mm lead spacing) in-line crimp t2 (ammo box) and t25 (reel) (7.5mm lead spacing) t60 (ammo box) and t3x (reel) (10mm lead spacing inward crimp t40 (ammo box) and t4x (reel) (7.5mm lead spacing) t35 (ammo box) and t2d (reel) (10mm lead spacing) based on eia-468-b specifcations . m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 60 | metal oxide varistors standard bulk packaging disk size mm varistor voltage quantity pieces/bag quantity pieces/carton diameter 05 all 1000 10000 diameter 07 all 500 5000 diameter 10 180k-471k 500 5000 above 511k 300 3000 diameter 14 180k-751k 300 3000 above 781k 200 2000 diameter 18 all 200 2000 diameter 20 180k-621k 100 1000 above 681k 50 500 diameter 25 180k-621k 50 500 above 681k 30 300 disk size mm varistor voltage quantity pieces/box quantity pieces/carton 32d (wire lead type) 201k-391k 80 320 431k-621k 60 240 681k-122k 40 160 32d 201k-391k 80 320 431k-621k 60 240 681k-122k 40 160 34r 201k-391k 80 320 431k-621k 60 240 681k-122k 40 160 40d 201k-391k 80 320 431k-621k 60 240 681k-122k 40 160 53d 201k-391k 80 320 431k-621k 60 240 681k-122k 40 160 m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 61 wpi reserves copyright meta l oxid e va rist or s ar e tr ansient vo lt age su rg e suppre ss ion pr oduc ts. used in bo th ac and dc applic at io ns, thes e de vices clam p tr an sien t vo lt ag es and di ve rt tr ansi en t cu rren ts . me tal ox id e va rist or s ar e av ailable in the wi de st range of vo lt ages and cu rr en t handli ng size s. mo v in traf ?c light protectio n mo v in bridge recti?er protection mo v in automotive equipment protection 120va c vz20d201k bs 1.5k e220c mo v in ac line protect io n mo v in control circuit prot ec tion mov in microwa ve oven mo v for 3 phase ac line protec ti on mo v in triac pr ot ection contr ol cir cuit controller lamp regula tor electr onic cir cuit a ll application notes/circuits are shown as examples only . it is the responsibility of the purchaser to insure that the application meets purchaser? s speci?ca- tions. no representation or warranty , whether express or implied, is given and no liability is assumed by wpi with respect to the use of such examples. m etal o xide v arist ors applications m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 62 | metal oxide varistors circuit examples data line protection r vz (10mm disc size) vz (10mm disc size) vz (10mm disc size) tvs (lce) tvs (lce) tvs (lce) l 1 l 2 g l 1 l 2 g r 120vac line protection vz20d241kbs wxp-104k wye-222m 1.5ke250c 1.5ke250c 1.5ke250c wxp = w orld products rfi suppressor ?x t ype? (across-the-line) wye = w orld products rfi suppressor ?y t ype? (line-to-ground) wye-222m vz20d241kbs vz20d241kbs l h n g h n g l dislaimer: the names of the products and the specifcations in this catalog are subject to change without notice for the sake of improvement world products, llc also reserves the right to discontinue any of these products the products in this catalog are intended for use in ordinary electronic products if any of these products are to be used in special applications requiring extremely high reliability, where product defects might pose a safety risk, please consult world products, llc though world products, llc has taken all possible precautions to ensure the quality and reliability of its products, improper use of products may result in bodily injury, fre, or similar accident if you have any questions regarding the use of the products in question, please consult world products, llc please be advised that world products, llc accepts no responsibility for any infraction by users of world products, llc products on third party patents or industrial copyrights 1.5ke250c 1.5ke250c 1.5ke250c vz20d241kbs wpgt -3r230 vz20d241kbs vz20d241kbs r r ti p ring g ti p ring g r telecom circuit protection 240vac line protection vz20d431kbs wxp-104k wye-222m 1.5ke440c 1.5ke440c 1.5ke440c wxp = w orld products rfi suppressor ?x t ype? (across-the-line) wye = w orld products rfi suppressor ?y t ype? (line-to-ground) wye-222m vz20d431kbs vz20d431kbs l h n g h n g l m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 metal oxide varistors | 63 this page was intentionally left blank. m etal o xide v arist ors world products inc. 19654 eighth street east, sonoma, ca 95476 | phone (707) 996-5201 | fax (707) 996-3380 | www.worldproducts.com rev. 9.9 |
Price & Availability of VZ14D151KBS
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |